Convert Whole Number To Number With Decimal 


Convert Whole Number To Number With Decimal  Excel 
View Answers 
i've been trying to figure this out on my own but seem to be hitting road blocks.
i have a column of numbers that we extracted from a database as whole numbers. for instance, 30 should be .30 and 100 should be 1.00. when i try to increase or decrease the decimal point it doesn't allow me to convert it to those positions.
would any one have a tip of how i can easily convert this? there are over 2000 entries in my excel spreadsheet so to do it manually would take a lot of time/effort.
thank you!
i have a column of numbers that we extracted from a database as whole numbers. for instance, 30 should be .30 and 100 should be 1.00. when i try to increase or decrease the decimal point it doesn't allow me to convert it to those positions.
would any one have a tip of how i can easily convert this? there are over 2000 entries in my excel spreadsheet so to do it manually would take a lot of time/effort.
thank you!
Similar Excel Tutorials
Round to a Specific Decimal for Any Number in Excel
Round each number to a specific decimal number. This works for numbers that don't already have a decimal and ones t ...
Round each number to a specific decimal number. This works for numbers that don't already have a decimal and ones t ...
Get the Decimal Part of a Number in Excel
How to get the decimal part of a number without any rounding in Excel. This tip allows you to simply remove the who ...
How to get the decimal part of a number without any rounding in Excel. This tip allows you to simply remove the who ...
Change Minutes from a Decimal to a Percentage of an Hour
Change minutes stored as a decimal into a fraction of an hour. For instance, if time is stored as 8.15, 8 hours and ...
Change minutes stored as a decimal into a fraction of an hour. For instance, if time is stored as 8.15, 8 hours and ...
Show Fewer Decimal Places Without Losing Precision in Excel
How to show a smaller number that looks better without sacrificing decimal places or precision in the actual number ...
How to show a smaller number that looks better without sacrificing decimal places or precision in the actual number ...
Easily Enter Fractions into Excel
This is a very simple trick to enter fractions quickly without having to manually format anything. This allows you ...
This is a very simple trick to enter fractions quickly without having to manually format anything. This allows you ...
Round Numbers Up or Down in Excel
How to round a number up or down and also to a specified number of decimal places in Excel. This will allow you to ...
How to round a number up or down and also to a specified number of decimal places in Excel. This will allow you to ...
Subscribe for Weekly Tutorials
BONUS: subscribe now to download our Top Tutorials Ebook!
Helpful Excel Macros
Convert Numeric Dollar Values into Text in Excel  UDF
 Convert a numeric dollar amount into its text equivalent. This UDF (user defined function) for Excel will change or tra
 Convert a numeric dollar amount into its text equivalent. This UDF (user defined function) for Excel will change or tra
Replace Formulas with Values (For The Entire Workbook)
 This macro will convert every formula in an entire workbook into its respective value. This is basically a quick way to
 This macro will convert every formula in an entire workbook into its respective value. This is basically a quick way to
Get the Number(s) Out of a Cell that Contains Both Text and Numbers in Excel  UDF
 This free Excel UDF allows you to get the numbers out of a cell that contain both text and numbers. This is a great fun
 This free Excel UDF allows you to get the numbers out of a cell that contain both text and numbers. This is a great fun
Sort Data that Doesn't Have Headers in Descending Order in Excel
 Sort data in Excel that doesn't have headers using a macro. This Excel macro assumes that your data set does not have a
 Sort data in Excel that doesn't have headers using a macro. This Excel macro assumes that your data set does not have a
Format Cells in The Number (Numerical) Number Format in Excel
 This free Excel macro formats selected cells in the Number or Numerical number format in Excel. This means that the cel
 This free Excel macro formats selected cells in the Number or Numerical number format in Excel. This means that the cel
Similar Topics
Hi there, I have a string of numbers and I would like to add zeros to the end of it.
For example my numbers are formatted like this: 1234 and I would like to add zeros to the end so it looks like this: 123400 (no decimal).
I would do it manually but I have a column of over 2000 different numbers.
Thanks for your help, you guys are great!
For example my numbers are formatted like this: 1234 and I would like to add zeros to the end so it looks like this: 123400 (no decimal).
I would do it manually but I have a column of over 2000 different numbers.
Thanks for your help, you guys are great!
In excel, I tried to convert numbers to number format, using
format/cells/number from the category list. But it won't take, and stays
textlike. Any ideas?
format/cells/number from the category list. But it won't take, and stays
textlike. Any ideas?
I was able to convert start date and and end date to the number of days
inbetween the two dates. Does anyone know how to then convert the number of
days into months?
inbetween the two dates. Does anyone know how to then convert the number of
days into months?
Hi,
I made a simple worksheet that we have been manually entering the time for employees, but there are too many errors (even with simple math). Can someone help me convert the time of ex: written 84:30 or 103 (meaning 8:00am to 4:30pm) where you have the total weekly hours? Right now I have a column for overtime. Is there a way to automatically calculate the over time also? The work day is 84:30 with a half hour lunch (lunch is not calculated into the hours, so you minus a half hour). 84:30 equals 8 hours. So, if a person works 8am to 6:30pm, how can I set it up where in the first row of time, I will type in 86:30pm. In the totals column to the far right, it will display 8 hours. In the (O.T.) column, it will display 2 hours.
This way, when I call in my payroll, I will have the total "regular" hours in one row and underneath, I will have the total overtime hours.
Or... does anyone have a better solution to keeping track of their hours?
Thanks!
Marty
I made a simple worksheet that we have been manually entering the time for employees, but there are too many errors (even with simple math). Can someone help me convert the time of ex: written 84:30 or 103 (meaning 8:00am to 4:30pm) where you have the total weekly hours? Right now I have a column for overtime. Is there a way to automatically calculate the over time also? The work day is 84:30 with a half hour lunch (lunch is not calculated into the hours, so you minus a half hour). 84:30 equals 8 hours. So, if a person works 8am to 6:30pm, how can I set it up where in the first row of time, I will type in 86:30pm. In the totals column to the far right, it will display 8 hours. In the (O.T.) column, it will display 2 hours.
This way, when I call in my payroll, I will have the total "regular" hours in one row and underneath, I will have the total overtime hours.
Or... does anyone have a better solution to keeping track of their hours?
Thanks!
Marty
I have a spreadsheet where I need to calculate the increase in % one year over the other in column D for Eg if Profits are 95415 in Jan 2008 (Column B) and 80215 in Jan 2008 (Column C), then the % Increase will be (9541580215)/80215 *100
I can calculate the formula for this , but the problem comes where for eg there is a loss in Jan 2008 for 95415 and there was a profit in Jan 2007 for 80215. How do I set up formula to take negatives & positives into account in calculating the increase or decrease/
Your assistance or anybody's on the forum will be greatly appreciated
Regards
Howard
http://www.mrexcel.com/forum/showthr...ghlight=howardneed
I can calculate the formula for this , but the problem comes where for eg there is a loss in Jan 2008 for 95415 and there was a profit in Jan 2007 for 80215. How do I set up formula to take negatives & positives into account in calculating the increase or decrease/
Your assistance or anybody's on the forum will be greatly appreciated
Regards
Howard
http://www.mrexcel.com/forum/showthr...ghlight=howardneed
Good afternoon,
Is there a way to enter a colon into a standard number to create a value that can be formatted into a 24 hour time value ?
eg a time is listed as 1345 with a general number format, and I want it returned as 13:45 witha custom format of hh:mm.
Other than creating a table and using a vlookup function, I am hoping there is a better way?
Darren
Is there a way to enter a colon into a standard number to create a value that can be formatted into a 24 hour time value ?
eg a time is listed as 1345 with a general number format, and I want it returned as 13:45 witha custom format of hh:mm.
Other than creating a table and using a vlookup function, I am hoping there is a better way?
Darren
Hi guys,
would really appreciate anyones help with this.
I have a column full of textformatted fractions...
4/5
6/4
3/1
2/5
4/5
etc, etc.....the column is very long!!
I need to convert these to actual fractions...ones I can add to equations, allowing me to multiply and add.
If I highlight the column and goto "format Cells" and change to fraction, the values still stay in the left of the cell.....its only when I manually click on each individual cell, then tick the little green tick, does the cell validate, and the value in the cell moves to the right (and is therefore a proper value).....problem is I have to keep doing this for each individual cell.....and I have 70000+ cells in this column!
Any suggestions on how I could speed this up?
thanks
would really appreciate anyones help with this.
I have a column full of textformatted fractions...
4/5
6/4
3/1
2/5
4/5
etc, etc.....the column is very long!!
I need to convert these to actual fractions...ones I can add to equations, allowing me to multiply and add.
If I highlight the column and goto "format Cells" and change to fraction, the values still stay in the left of the cell.....its only when I manually click on each individual cell, then tick the little green tick, does the cell validate, and the value in the cell moves to the right (and is therefore a proper value).....problem is I have to keep doing this for each individual cell.....and I have 70000+ cells in this column!
Any suggestions on how I could speed this up?
thanks
I've been poking around trying to figure this out but can't. The time of 9 hours, 15 minutes is being returned from a calculation but I want the cell to display the 9.25 hours instead. This seems like something simple on the surface, but apparently it's not. Any help would be appreciated!
I am looking for assistance in having one cell in a text format equals another cell that contains a time value in hh:mm format.
For example: Cell A1 has a time format (hh:mm) value of 04:00; which is the Start Time. I would like cell D1 to have a text format value of "04:00" (result is dependant upon what is entered in A1). I would duplicate the same formulas to reflect Stop Times in other cells.
My final result is to have another cell (F1) use the Concatenate formula to have the Start and Stop time shown in one cell as "04:00  12:30". The times would change based on the Time formated values entered into the Start and Stop time cells.
I have researched this in the board and found many excellent ways to do the opposite, but not convert Time format to Text format. Any assistance is greatly appreciated.
Shane
For example: Cell A1 has a time format (hh:mm) value of 04:00; which is the Start Time. I would like cell D1 to have a text format value of "04:00" (result is dependant upon what is entered in A1). I would duplicate the same formulas to reflect Stop Times in other cells.
My final result is to have another cell (F1) use the Concatenate formula to have the Start and Stop time shown in one cell as "04:00  12:30". The times would change based on the Time formated values entered into the Start and Stop time cells.
I have researched this in the board and found many excellent ways to do the opposite, but not convert Time format to Text format. Any assistance is greatly appreciated.
Shane
Hi Guys,
Could you be so kind as to provide some code that will enable me to display a text box on a userform rounded up to 1 decimal place.
Where am I going wrong....
it calculates the number entered in textbox1 and divides it by a value that changes in cell O26 but the answer is in about 8 or more decimel places.
Only need like 65.3 as an answer not 65.277756942
This is the code ive used.
Private Sub CommandButton1_Click()
TextBox2.Value = Val(TextBox1.Value) / Range("O26").Value
End Sub
Could you be so kind as to provide some code that will enable me to display a text box on a userform rounded up to 1 decimal place.
Where am I going wrong....
it calculates the number entered in textbox1 and divides it by a value that changes in cell O26 but the answer is in about 8 or more decimel places.
Only need like 65.3 as an answer not 65.277756942
This is the code ive used.
Private Sub CommandButton1_Click()
TextBox2.Value = Val(TextBox1.Value) / Range("O26").Value
End Sub
I use Excel 2000 (9.0.2720)
In range A1:D10, I have entered the figures in actuals (e.g. 34532642.45,
78945624.89 etc.). How can I convert those figures in Lakhs / Thousands /
Crores? Before converting, Can Excel 2000 prompt me for conversion in Lacs /
Thousands / Crores?
In range A1:D10, I have entered the figures in actuals (e.g. 34532642.45,
78945624.89 etc.). How can I convert those figures in Lakhs / Thousands /
Crores? Before converting, Can Excel 2000 prompt me for conversion in Lacs /
Thousands / Crores?
HELP!!
I need to know the formula (if there is one) for Excel to figure all the possible combinations of a given set of numbers that will add up to a specified sum.
In other words, if I give the following numbers 1, 2, 2, 3, 3, 4, 5, 5, 6, 7, 7  I want Excel to figure all the possible combinations that will add up to 23, and also SHOW ME those combinations, and not just HOW MANY combinations there are.
i.e. one possible combination is 2, 2, 3, 4, 5, 7
Can this be done? What is the formula? I'm having a hard time figuring it out!!
Desperately,
Jenny
I need to know the formula (if there is one) for Excel to figure all the possible combinations of a given set of numbers that will add up to a specified sum.
In other words, if I give the following numbers 1, 2, 2, 3, 3, 4, 5, 5, 6, 7, 7  I want Excel to figure all the possible combinations that will add up to 23, and also SHOW ME those combinations, and not just HOW MANY combinations there are.
i.e. one possible combination is 2, 2, 3, 4, 5, 7
Can this be done? What is the formula? I'm having a hard time figuring it out!!
Desperately,
Jenny
I am creating a basic accounting spreadsheet and I ask for assistance to automate data entry posts. I would like to have entries that are entered in the general journal automatically post to the corresponding ledger accounts. The entries need to remain in chronological order. Relative cell referencing will not work because the rows in the ledgers will not correlate to the rows in the journal because the journal but the entries in the ledger need to input on the next available row in that ledger account. Additionally, as the number of entries increase, can the ledger accounts add a new row?
Attached is a very simple example with three transactions. I have included an end state view in the ledger accounts tab.
Hi folks,
Hoping someone can help me quickly as I'm pulling my hair out and have a deadline getting too close.
Been trailing the net and this board but can't work out how to do a simple variance.
How do I work out the difference between two numbers  including negatives.
If the numbers are all positive, it's fine as it's simply a case of A  B = C which is your difference. However, that doesn't work if B is negative.
I need a formula that would give the following:
First Number / Second Number / Difference
1 / 5 / 4
1 / 5 / 6
1 / 5 / 6
1 / 5 / 4
5 / 1 / 4
Hopefully there's a simple function I've been missing.
Thanks in advance, R
Hoping someone can help me quickly as I'm pulling my hair out and have a deadline getting too close.
Been trailing the net and this board but can't work out how to do a simple variance.
How do I work out the difference between two numbers  including negatives.
If the numbers are all positive, it's fine as it's simply a case of A  B = C which is your difference. However, that doesn't work if B is negative.
I need a formula that would give the following:
First Number / Second Number / Difference
1 / 5 / 4
1 / 5 / 6
1 / 5 / 6
1 / 5 / 4
5 / 1 / 4
Hopefully there's a simple function I've been missing.
Thanks in advance, R
Hello everyone, I am new to this forum and have been using excel for about 3 years. I have learned alot but still can not figure out how to make numbers add up in one box like a running total. Meaning, If I have a list and in the list is one cell for each item say like cell a1 is for a can of coke and cell a2 is for a car tire and so on,and i want to keep a running total by adding a number to cell a1 or a2 like say "3 i.e. 3 tires or cans of coke" and later that day i come back and need to add 2 more ......so i want to be able to just click on the cell a1 or a2 and enter the number 2 and the cell would add the number in it to the number im adding to it to show a result of 5 tires or whatever. I am sorry If i am not asking the question in an understandable manor but its the best way I can think to ask it.lol anyways, any help would be appreciated, Thanks in advance.
James
James
Right now I have a sports league with 8 teams, I'd like to create a random 7game schedule where each team plays the other team only once. Essentially this will be a 7game round robin. However, I'd like to be able to use this for any number of teams and games.
I'd like to do this in Excel, but I can't figure out how to have a randomly generating nonrepeating macro with text values in cells.
So right now I have a column of 8 values and need matrix of 7 columns by 8 rows next to it.
I've found this thread that has one for numbers, but I can't figure out how to do it for text values...
http://www.excelforum.com/excelprog...mnumbers.html
Thanks all!
I'd like to do this in Excel, but I can't figure out how to have a randomly generating nonrepeating macro with text values in cells.
So right now I have a column of 8 values and need matrix of 7 columns by 8 rows next to it.
I've found this thread that has one for numbers, but I can't figure out how to do it for text values...
http://www.excelforum.com/excelprog...mnumbers.html
Thanks all!
I want to create 6 numbers from 11 numbers..
lets suppose my numbers a 1,2,3,4,5,6,7,8,9,10,11
I want to generate all possibilities of the 6 numbers. But i dont want duplicate series.. I mean 1,2,3,4,5,6 and 6,5,4,3,2,1 are duplicates.
ANY HELPS ARE GREATLY APPRECIATED
lets suppose my numbers a 1,2,3,4,5,6,7,8,9,10,11
I want to generate all possibilities of the 6 numbers. But i dont want duplicate series.. I mean 1,2,3,4,5,6 and 6,5,4,3,2,1 are duplicates.
ANY HELPS ARE GREATLY APPRECIATED
I have data with time in standard fromat i.e. 3:00PM but I need it to be in
24 hour format i.e. 15:00. How can I do this?
24 hour format i.e. 15:00. How can I do this?
dear supervirsor
i would like to know how to change english numbers to arabic number on excel
, where when i change the language from english to arabic the numbers didnt
changed it still in english
i would like to know how to change english numbers to arabic number on excel
, where when i change the language from english to arabic the numbers didnt
changed it still in english
I know this question has been asked a bajillion times, so I apologize for the redundancy.
I am working with an Excel spreadsheet and saving it as a .csv file in order to upload to an application that parses out the .csv data as transactions. The system requires .csv files, so this is how I need to save my doc (with this extension). I have been successful at preventing Excel from coverting that long number into scientific format. I have saved as a TXT file, pasted the longer number and it displays correctly. That is all good. But I have to save as a .csv. So if I do that, close the Excel window, and then open again (as the .csv file), the numbers are back to being displayed in scientific format. I have tried creating an Excel doc from scratch and entering text in Text format, to see if this created a cleaner file. But again, the second I save as .csv, close the window and then open that file up again, that dang scientific format is back.
Does anyone have any idea of how to work around this? Once I have successfully gotten the numbers to display as the longchain number, how can I get them to "stick" so that they don't revert back to scientific format when I reopen the file?
Thanks so much for your help!
I am working with an Excel spreadsheet and saving it as a .csv file in order to upload to an application that parses out the .csv data as transactions. The system requires .csv files, so this is how I need to save my doc (with this extension). I have been successful at preventing Excel from coverting that long number into scientific format. I have saved as a TXT file, pasted the longer number and it displays correctly. That is all good. But I have to save as a .csv. So if I do that, close the Excel window, and then open again (as the .csv file), the numbers are back to being displayed in scientific format. I have tried creating an Excel doc from scratch and entering text in Text format, to see if this created a cleaner file. But again, the second I save as .csv, close the window and then open that file up again, that dang scientific format is back.
Does anyone have any idea of how to work around this? Once I have successfully gotten the numbers to display as the longchain number, how can I get them to "stick" so that they don't revert back to scientific format when I reopen the file?
Thanks so much for your help!
I have a spreadsheet set up with an employees information, including the start date. After each year that the employee is working, he gets bumped up on the pay scale. For this reason, I only need to know how many years the employee has been working, rounded down to the nearest year.
This is what I have so far (hire date is in column B):
=((TODAY()B4)/365)&" YEARS"
This function gives me a number with many decimal places.
I tried:
=ROUNDDOWN((TODAY()B4)/365),0)&" YEARS"
It tells me I have too few arguments. Please help!
This is what I have so far (hire date is in column B):
=((TODAY()B4)/365)&" YEARS"
This function gives me a number with many decimal places.
I tried:
=ROUNDDOWN((TODAY()B4)/365),0)&" YEARS"
It tells me I have too few arguments. Please help!
First time in this forum. Hi all. I have a challenging question, is there a way either by VBA or manually (preferably both, if possible) to actually unite the X amount of numbers that are in a cell given the contents is alphanumeric? I'll give you the following examples to see if you can understand what I' referring to?
DATA output should be
asd67,h876 > 67876
2,3,ujdj5&34 > 23534
909k86m34 > 9098634
Hope this makes sense?
DATA output should be
asd67,h876 > 67876
2,3,ujdj5&34 > 23534
909k86m34 > 9098634
Hope this makes sense?
I have looked over the forums for information on how to do this, and can not find anything. I have used conditional formatting to identify duplicates in my spreadsheet. I have a unique user ID, which combines the first and last name fields into one. However, in 10,000 there are a number of John Smiths, Joe Adams, etc. With smaller lists, we search manually, and then add a 1, 2, 3, etc to each duplicate to create a unique value for the User ID.
My question is:
Is there a way to check for duplicates, and then automatically add numbers to the duplicate values to make them unique? If so, how can this be done?
So that you will have this:
JohnSmith
JohnSmith2
JohnSmith3
JaneDoe
JaneDoe2
JohnAdams
JohnAdams2
JohnAdams3
JohnAdams4
I think I have done a good job in illustrating what I would like to be able to do, but if there is still something that is unclear, I will post whatever clarification is needed.
Thank you in advance for your help!!
My question is:
Is there a way to check for duplicates, and then automatically add numbers to the duplicate values to make them unique? If so, how can this be done?
So that you will have this:
JohnSmith
JohnSmith2
JohnSmith3
JaneDoe
JaneDoe2
JohnAdams
JohnAdams2
JohnAdams3
JohnAdams4
I think I have done a good job in illustrating what I would like to be able to do, but if there is still something that is unclear, I will post whatever clarification is needed.
Thank you in advance for your help!!
I was wondering if anyone could help me out please?!?!
I need to have a cell on Sheet2 display the TEXT from a cell on Sheet1, is his possible??
Example:
Sheet1, Cell A1 contains a clients name and I would like to have Sheet2, Sheet3, Sheet4 etc... Display that clients name in a cell of my choosing (could be a different cell on each Sheet) automatically after entering it once on Sheet1, cell A1.
I thought this was possible but I can't seem to figure it out. I haven't done any real Excel work in quite a long time but I thought I had done this before a long time ago!! Any help would be GREATLY appreciated!! Thanks in advance...
P.S. If I use autosum to do this it just displays the number 0, obviously, since it is trying to add numbers...
I uploaded a copy of the spreadsheet, What I would like to happen is have the text from Sheet1,D4 automatically be placed in Sheet2,A1 and Sheet3, B2. Hope this helps
Aric
I need to have a cell on Sheet2 display the TEXT from a cell on Sheet1, is his possible??
Example:
Sheet1, Cell A1 contains a clients name and I would like to have Sheet2, Sheet3, Sheet4 etc... Display that clients name in a cell of my choosing (could be a different cell on each Sheet) automatically after entering it once on Sheet1, cell A1.
I thought this was possible but I can't seem to figure it out. I haven't done any real Excel work in quite a long time but I thought I had done this before a long time ago!! Any help would be GREATLY appreciated!! Thanks in advance...
P.S. If I use autosum to do this it just displays the number 0, obviously, since it is trying to add numbers...
I uploaded a copy of the spreadsheet, What I would like to happen is have the text from Sheet1,D4 automatically be placed in Sheet2,A1 and Sheet3, B2. Hope this helps
Aric
My balance sheet is prepared in rupees.
I want to show all figures in Lacs like value 235600 show 23.56
In previous year i divided all values one by one by inputting /100000 but its so tedious.
Pl help.
I want to show all figures in Lacs like value 235600 show 23.56
In previous year i divided all values one by one by inputting /100000 but its so tedious.
Pl help.