Close Window   
Free Ebook
Get Your Free Excel
ebook!
Our Top 15 Excel Tutorials
Instant Access!
E-mail:
Excel Forum

Drag And Fill Overwrites Filtered Data

Forum Register
Search Excel Forum Posts, Tutorials, Macros, Tips, and More

Hi there. I'm using Excel 2007 and often use filters to find inconsistent data (mis-spellings, etc.) and then clean up the data using the fill handle to fill in correctly formatted values. I'm finding that, with a simple filter on, dragging over cells hidden by the filter changes the values in the hidden cells too. This is something I don't remember from my last version of Excel. I'm wondering if I've mis-remembered how this control works, or if there is a setting I can't find.

My goal is to drag and fill (or paste) in a colum with a range of rows wiht some hidden (filtered out) rows, and have the filtered out data be unaffected, if that makes sense.

Thanks!

T

View Answers     

Similar Excel Tutorials

Sum the Visible Rows from a Filtered List in Excel
How to SUM only the visible rows from a filtered data set in Excel. To do this, we will use the SUBTOTAL() function ...
Increment a Date By X Days for Each Row in Excel
How to quickly increment a date by a certain number of days for each entry. Type the first date in a cell. Make sur ...
MAX and MIN Values from a Filtered List in Excel
How to get the MAX and MIN values from a filtered data set. This method returns the value from only the visible row ...
Average the Visible Rows in a Filtered List in Excel
Average the results from a filtered list in Excel. This method averages only the visible rows once you apply a fil ...
SUBTOTAL Function - Work on Filtered Data in Excel
Perform basic functions on a filtered dataset in excel, including SUM, AVERAGE, COUNT, COUNTA, MAX, MIN, and more. ...
Count the Visible Rows in a Filtered List in Excel
How to use the COUNT function on a filtered list of data so that hidden rows are not included in the count. To do ...

Helpful Excel Macros

Delete Hidden Rows in a Workbook
- This macro will delete hidden rows from every worksheet in an entire workbook. However, note that this will only delete
Filter Data in Excel Without the Filter "Arrow" Appearing in the Filtered Column - AutoFilter
- This Excel macro filters data in Excel without the filter "arrow" appearing in the column that is being filtered. This
Display Filter Arrows in a Table or Data Set in Excel - AutoFilter
- This free Excel macro allows you to apply filter settings to a data set, list, or range of data in Excel. This will not
Display the AutoFilter Criteria Applied to a Data Set in a Cell in Excel - UDF
- This free Excel UDF (user defined function) allows you display the filter criteria that has been applied to a data set i
Delete Hidden Worksheets
- This macro will delete all hidden worksheets within a workbook. When you run this macro a warning window will pop up for

Similar Topics







Let's say, if two fields in one column has been filled with numerical
increament, i.e. A1 is 2 and A2 is 4. Now I want to fill the whole column
with this increament pattern till row A20. One thing we will all do is to
left click on the fill handle and drag it down to row A20. But if the task is
to fill to row 500, the mouse draging sometime won't be easy to locate the
row. I am wondering anyone can help me to find the keyboard shortcut
equivalent to that drag fill handle action.

Thanks



Hi,

I use filters a lot at my work. One thing I've noticed is that if I have something filtered and want to copy and paste only what I see from one column to another column right next to it, it will copy what is filtered, but then paste into the unfiltered portion.

Is there some way to copy only what I see when it's filtered, THEN paste only onto the adjancent cells which is also filtered?

For example let's say i have each of the number below in a cell (Fig 1). And then I hide rows 2 -3, so only 1 and 4 is showingI only see 1 & 4 in column A. I want to copy and paste 1 and 4 to the next column over one row so it looks like Fig. 2 when unhidden. Not like Fig. 3.

Fig. 1

1
2
3
4

Fig. 2

1 1
2
3
4 4

Fig. 3
1 1
2 4
3
4


Hi!

I have a question regarding filtering of columns, hopefully someone is able to put me on the right track. I have set up Excel 2007 so that I can click on the drop-down menu in each column to filter them.

However, in my data set there is one blank row separating two set of rows. Now, when I apply the filter on a column, all the rows above the blank row filter correctly, but all the rows below stay un-filtered.

I guess Excel only looks at the consequtive rows, then stops when it hits a blank row. Is there any way of applying the filter beyond a blank row (i.e. the whole column)?

Any advice is higly appreciated.


When I auto filter a spreadsheet, I can't figure out how to delete or
eliminate from the sheet the filtered-out rows. So when I refilter the sheet
with new items to get rid of, the old filtered items come back. I've tried
copying the range to another file, but I always get all the old data in the
new file.



I am looking for the code to select the visible data after applying a data filter. Actually I know how to select the data after applying the data filter but the issue is I am not able to exclude the header row and give the target range as used (non-blank) rows only!!

I am using below code to Select the Visible rows in the target range:

Code:

Range("A:p").SpecialCells(xlCellTypeVisible).Select


Problems in this code a

1) after applying the filter, while selecting the data it is selecting all the rows in given range till last row on the workbook. I need this to select the the data only till the last used row in the given range.

2) It is not possible to provide the address of the first row after we apply the filter since the first row address may change depending on the values in the table.

E.g. 1st time when I am running the macro the first row in the visible filtered data is starting at Cell address A4 and next time when I will run the macro it may be A6

3) The Code is also selecting the 1st row which is a header row. How can we exclude it from selection.

Some one please revert with the solution.
Thanks in advance.


Hi there,

I am currently using 'Activecell.Offset(1,0).Select' to move down one cell at a time when I click on a button.

The problem I have now is that if someone was to filter by something then the 'next cell down' could be hidden behind the filter (by that I mean it didn't meet the filter criteria).

Is there anyway to move down to the next row, even if that row does not follow on Sequentially .

Any help would be greatly appreciated.

Regards,

James


I am trying to filter a list of records by the value in a cell and then (for the filtered result(s)) change the value in column Y just for the filtered results. This is the code I have at present which filters the records OK but I can't fathom what I need to do to ensure I only chnage the value of the cell(s) in column Y?

[CODE]ActiveSheet.Range("$A$1:$DC$5000").AutoFilter Field:=1, Criteria1:="GI255"
'After filtering I want to change the value in column Y for only the filtered entries CODE]


Hello -

I am using Excel 2007. In prior versions of excel, when copying data, if I wanted to copy visible cells only, I would select "Go To, Special, Visible Cells Only" and then copy a range a cells. The default was always set to copy everything (including hidden cells), unless I specifically selected copy visible cells only.

In 2007, the default is somehow set to always copy only visible cells. Sometimes, I want to be able to copy all cells including those hidden but cannot seem to figure out how to swith this default option. I looked under Excel Options and did not see an option there.

I don't want to have to unhide and rehide everything each time i copy. I know i could do the hiding and unhiding via VBA but would prefer not to have to.

Thanks for your suggestions.


Hi,
how do I select (in VBA) all the rows that were filtered out by autofilter (using VBA code) and delete them leaving just header. I just can't figure out how to select entire rows when the data is filtered...
Thanks for your hints!


i know how to use the data filters vertically but have been wondering if its possible to filter data horizontally so i could put a filter on, say column c and sort the data across the sheet rather than down. if its not possible i will find another way to do what i want but this seems to be just what i would need. does anyone know if it can be done?


Hi,

I am using

ActiveSheet.ShowAllData

in a piece of VBA and it causes an error if the sheet does not have a filter applied! Is there an if statement I can use to check if the data is filtered?

Thanks - this site is an absolute life saver!

Rich


Hello from sunny Madrid

I have created a complex formula to help me calculating Golf handicaps for players.


The formula is in the first cell and I want to drag the formula across to the right to cover the 18 holes.

But ALL the values change and I want some to change and some to stay constant.



How do I tell excel to drag the formula across but keep certain parts of the formula the same..ie ....=D11.... in the formula when dragged across doesn't go D12,D13;D14 in each cells formula and should stay as D11 for all.

Many thanks for your help

Ole


If you change Excel to Full Screen View and your taskbar is always on top (as
it normally is), the bottom of the spreadsheet is hidden behind the taskbar.
Does anyone know how to get around this without hiding the taskbar? I have
found that if I drag the taskbar to the bottom and then back up again, the
Excel window resizes itself correctly and the bottom of the spreadsheet is
visible again. Problem is, I want to do this from VBA! Can anyone help
please???



I'm attempting to filter columns E, G, and I all at the same time. I need to
display rows that have values greater than 0 in any one of those three
columns. So far I can only filter progressively. If I filter column E and
then filter column G, the second filter is only applied to the results of the
first filter.

Does anybody know if it's even possible to do what I'm trying to do?



Column 1 has roughly 20 rows of information. Cell C1 has the formula =A1.

Is there a formula so that when I drag C1 horizontally into D1, E1, F1, ..., the values placed in each cell will be =A2, =A3, =A4, ...

I do not want to transpose the values from column 1 into C1, D1,.... I want these cells to have a formula that links them up to column 1's values

Thanks

Is it possible to apply a filter to multiple sheets within the same Excel workbook, using the same filter criteria?

For example, suppose you have tables of data on 3 different tabs, all having the same headings. Suppose one of the headings is "gender". If you apply a filter to the table on Sheet 1, to only show the rows containing the word "female", is it possible to have the tables on Sheets 2 and 3 automatically update to only show the "female" rows? Or would you have to manually update the filter criteria in Sheets 2 and 3?

I hope this makes sense. Thank you in advance for any help.


Hi. I have a row in a spreadsheet in Excel that is hidden but i am unable to unhide it. I have tried the usual way by hovering between the rows above and below until i get the double line but this does not happen. I have also tried going through the Format - Row - Unhide option but this also doesn't work. Any suggestions?


Hi Guys

I have the following in G2:

=VLOOKUP(A2,Sheet1!A:D,4,FALSE)

The formula returns the correct result, which in this case is a number - 2

When I fill down my range, the formula copies correctly, but every result is the same. 2.

However, if I go to the next cell down (G3) and activate it by pressing F2, and then hit Enter, the result changes and is now correct.

Any ideas whats going wrong?


I have an excel form, I want my users to be able to open the form, fill in appropriate data, then click the save button. When the button is clicked, the data in the form should be saved to a new file and then the original form should be reset (clear all values) for a new set of data entry. When the data is saved, I want the new excel sheet to be saved to a location specified within the macro so the user doesn't have any options and I want the title of the new file to be the value of one of the cells.

I'm new to macros and would appreciate any help this board can offer. Thanks...


All on a sudden my mouse pointer in excel is not working properly. I cannot use my mouse to drag and fill, or to adjust the page break lines in the Page Break View mode. It always is in the shape of the white cross with black border and never changes it shape when pointed at the lower right edge of cells too. Now.......what to do in order to get out of this problem.
TIA


I feel like this should be really easy and I am just out of it today but I cannot figure this out. I want to lock a row and filter (with filter,not sort, tool) the other rows. I attached an example

The row in RED I want to never be changed or added in the filter, but I want row 2 and 1 to filter together. So I want (in this case) the flavor to filter with the same number. SO i guess the filter process would be dependent upon the total number of votes. Any ideas? Thanks!

I had to create the information in tables and went from there. Got it. Thanks!


Hello,

I need to know how to auto-fill text based on text in another cell. For
example:

Every time I enter "CHS" in Column B, I want Charleston to auto-fill in
Column C.
And when I enter "SAN", in Column B, I want San Diego to auto-fill in Column
C.

How can I set up a list like this? Any ideas?

Thanks!

Jason



Hello,

I am trying to fill a listbox on a userform with column headers, but I want it to be dynamic so that no matter how many column headers there are it won't be hard coded to a particular range.

Any help or suggestions would be greatly appreciated!

Andy


I saw two threads in this forum that asked this question, with no good answer. I am posting this solution for anybody still struggling with this.

The question:
How can you prevent a cell's contents from overflowing into the next cell?

Of course, you can make the column wider or turn on text wrapping, but you might not want to. Each of those solutions can mess up the layout of your sheet. You may just want to truncate the value.

Some people have suggested putting a space in the next cell. This is unnecessary, a pain in the but, and will mess up any ISBLANK type formulas, among other things.

The solution:
Select the cells in question and turn on text wrapping (Format>Cells>Alignment>Wrap Text).
Now select the row(s) in question and manually set the row height, by right clicking the row number and selecting "Row Height". Check the height of an adjacent row for a good value.

Your cells will now not spill over either horizontally or vertically. They will simply truncate anything that doesn't fit.

Be careful now, because parts of your data may be hidden. This can cause its own set of problems if one or two digits are neatly hidden away. Think ahead if other people might be using this sheet, and not be expecting to have some data hidden.

Tested in Excel 2002


Great tip! But one thing: On my machine (Excel 2008 Mac), the values in the formula cell are not correctly calculated simply by dragging. Instead, the values are equal to the cell above (the first entry formula value). To get the correct value, I need to click in the formula bar and then hit enter. (I only discovered this after an hour of tinkering, figuring I had botched the formula!)

Are there any ways around this so that it updates upon dragging the formula?