# How To Convert Time To Text?

I am looking for assistance in having one cell in a text format equals another cell that contains a time value in hh:mm format.

For example: Cell A1 has a time format (hh:mm) value of 04:00; which is the Start Time. I would like cell D1 to have a text format value of "04:00" (result is dependant upon what is entered in A1). I would duplicate the same formulas to reflect Stop Times in other cells.

My final result is to have another cell (F1) use the Concatenate formula to have the Start and Stop time shown in one cell as "04:00 - 12:30". The times would change based on the Time formated values entered into the Start and Stop time cells.

I have researched this in the board and found many excellent ways to do the opposite, but not convert Time format to Text format. Any assistance is greatly appreciated.

-Shane

## Similar Excel Tutorials

Change Minutes from a Decimal to a Percentage of an Hour
Change minutes stored as a decimal into a fraction of an hour. For instance, if time is stored as 8.15, 8 hours and ...
Convert Time to Minutes and Vice Versa in Excel
How to convert a time into minutes in Excel and also how to get minutes back into a time format. For instance, chan ...
Convert Scientific Notation to Numbers in Excel
How to convert scientific numbers to show their full amount; this method also allows you to retain the appearance o ...
Convert Month Name to Number and Vice Versa in Excel
How to convert a month's name, such as January, into a number using a formula in Excel; also, how to do the reverse ...
Convert Numbers Stored as Text to Numbers in Excel
I'll show you 4 ways to convert numbers stored as text to numbers in Excel.  This situation often happens when you ...

Format Cells as Time in Excel
- This free Excel macro formats a selection of cells in the Time format in Excel. This Time number format means that inst
Automatically Run a Macro at a Certain Time - i.e. Run a Macro at 4:30PM every day
- Automatically run an Excel macro at a certain time. This allows you to not have to worry about running a macro every da
Automatically Run a Macro so Many Seconds, Minutes, or Hours After an Excel Workbook has been Opened
- Run a macro after a certain amount of time has passed since the Excel workbook was opened. This means that you can set
Format Cells in The Number (Numerical) Number Format in Excel
- This free Excel macro formats selected cells in the Number or Numerical number format in Excel. This means that the cel
Format Cells in The General (default) Format in Excel Number Formatting
- This free Excel macro formats a selected cell or range of cells to the General number format in Excel. This is the defa

## Similar Topics

Good afternoon,

Is there a way to enter a colon into a standard number to create a value that can be formatted into a 24 hour time value ?

eg a time is listed as 1345 with a general number format, and I want it returned as 13:45 witha custom format of hh:mm.

Other than creating a table and using a vlookup function, I am hoping there is a better way?

Darren

How do I calculate the number of batches per hour? Here's what I have so far:

Cell B5: start time: 4:15 formatted as 4:15:00 am
Cell B6: finish time: 6:15 formatted as 6:15:00 am
Cell B7: total time: 2:00 formula in cell: =TEXT(B6-B5,"h:mm")
Cell B8: total batches processed: 22 (this is entered manually)
Cell B9: batches per hour: formula in cell: =B8/TEXT(B7,"h")

as long as I have this formula in cell B9 the answer comes out correct which should be 11 per hour.
If the formula in B9 is B8/B7, the answer is 264.0, Is this because of the way excel is reading the total time or the total time is formatted as a time, not an actual number? Is this the correct way to solve the problem?
answer should be 11 per hour.

In Excel I have been trying to find an easier way to calculate a time
difference where the times cross midnight. Example:
Start time: 23:50:00
End time: 00:15:00

How would you formulate an equation to determine the duration of time or
differnce between the start and end time?

I'm trying to use conditional formatting to highlight phone calls that came in between certain hours.

The call times are in the custom format h:mm, although it could easily be changed to an Excel time format. I'm using Excel 2002. I want the cell to have a different fill color if it falls within particular time frames.

Example: If the call came in between 22:00 and 23:59 color is light green.
If the call came in between 23:59 and 08:00 the color is yellow.

In excel, I tried to convert numbers to number format, using
format/cells/number from the category list. But it won't take, and stays
text-like. Any ideas?

I have data with time in standard fromat i.e. 3:00PM but I need it to be in
24 hour format i.e. 15:00. How can I do this?

I have a sheet which has the start, stop and time taken for lunch breaks.

I want to calculate the total time worked such that i have the hours worked. So if i worked 7 hours and 30min then the total time would be 7.5hrs. But i am not sure how to take into account the lunch break time (see enclosed sheet).

anyone have any ideas?

I am trying to figure out how to write a formula to figure out production cycle time.
We will be building 8 "widgets" a day.
We will work 10 hours a day.
There is a 20 minute break at 9:20 am.
Production shuts down for lunch 30 minutes for lunch at 12:30.
Production starts at 6:00 am.
Here is what I can do.
Production cycle time = (10*60)-30/8 or 71.25 minutes
If we start at 6:00 am, the first scheduled cycle completion time = TIME(6,0,0+71.25/1440)

My problem is when I am trying to use a logical "IF' statement to account for the 20 minute break or lunch and still calculate the end of each cycle time through the day I receive a number of error messages.
This is the formula I am trying to make work. I have the cell the formula is in, formatted with a "mm,ss" format.
=(IF(D4+G1/1440>9:20,(D4+G1)/24,(D4+G1+15)/1440))
I have included an attachment to help (a picture is worth a thousand words).

Any help will be greatly appreciated.
I have bought a number of books in an attempt to figure this out, and I am still stumped

Hi, this is something so simple that I have forgotten how to do it.
I want F3 to turn yellow if someone selects "Yes" from a drop down list in cell E3, then F3 has no fill once data is entered into it. And F3 turns Black if E3= no selected from the list. Or F3 turns red if E3 contains "TBC"

so in summary,

if E3="Yes", then F3 conditional format to Yellow until data is entered in it.
if E3="No", then F3 conditional format to Black
if E3="TBC", then E3 & F3 conditional format to Red until E3 is changed to
"Yes" or "No" at a later time.

Thanks in Advance for the help

Mutley13

Hi Guys,
I need help....I am working production scheduling with Start and End time but there is a lunch time and tea time. Is there any formula to calculate Start time to End time with excluding lunch time?
Here is example :

Lunch time :12:00pm to 1:00pm.
Duration Process :6 hours.
Start Time (8:00am)
End time (5:00 pm)

I need a formula to calculate from Start Time 8:00am and what is the End Time? with 1 hour lunch time...

Thanks,
ET

Hi guys,

would really appreciate anyones help with this.

I have a column full of text-formatted fractions...

4/5
6/4
3/1
2/5
4/5

etc, etc.....the column is very long!!

I need to convert these to actual fractions...ones I can add to equations, allowing me to multiply and add.

If I highlight the column and goto "format Cells" and change to fraction, the values still stay in the left of the cell.....its only when I manually click on each individual cell, then tick the little green tick, does the cell validate, and the value in the cell moves to the right (and is therefore a proper value).....problem is I have to keep doing this for each individual cell.....and I have 70000+ cells in this column!

Any suggestions on how I could speed this up?

thanks

In my Excel spreadsheet I have a column to store the email addresses of my clients. Every time I click on the text of an email address, it automatically opens Outlook with a new message composed to that address. How do I stop this from happening? I don't even use Outlook for my email and this is really frustrating. I've tried changing the format of the column to no avail.

Thank you; your help is most appreciated.

Happy Day to all,

A1= time in
B1= time out
C1= time in
D1= time out

I want to calculate the late and under time,
Office start at 9:am w/30 mins Grace period,
The break time is one hour only, please include over breaktime in calculation.
End of office hours 6:00 pm, strickly no over time

Entering time values in custom format [h]:mm:ss
Cells accept hours over 23,
Adding cells in column returns correct total time.
Have not found a way to multiply these cells by a \$ hourly rate.
So use HOUR(cell ref) and MINUTE(cell ref) to capture values in referenced
cell - then use these values to calculate total payment for \$rate per hour.
However, the HOUR(cell ref) formula returns the hours in excess of 24 when
the cell contains an hour value in excess of 23 (ie 27 hours returns 3).

I have a large database with names, addresses etc. When I try to make changes
to the email address, like change the font color or change on letter, Excel
tries to email the address. If I click in the formula bar to make the
changes, it automatically changes it back to all blue text and underlined. I
have tried to format all of the cells as "Text" to show as entered, but it

I was wondering if anyone could help me out please?!?!

I need to have a cell on Sheet2 display the TEXT from a cell on Sheet1, is his possible??

Example:

Sheet1, Cell A1 contains a clients name and I would like to have Sheet2, Sheet3, Sheet4 etc... Display that clients name in a cell of my choosing (could be a different cell on each Sheet) automatically after entering it once on Sheet1, cell A1.

I thought this was possible but I can't seem to figure it out. I haven't done any real Excel work in quite a long time but I thought I had done this before a long time ago!! Any help would be GREATLY appreciated!! Thanks in advance...

P.S. If I use autosum to do this it just displays the number 0, obviously, since it is trying to add numbers...

I uploaded a copy of the spreadsheet, What I would like to happen is have the text from Sheet1,D4 automatically be placed in Sheet2,A1 and Sheet3, B2. Hope this helps

-Aric

I am creating a data sheet to be completed by other users. I would like to
format the text cells (name, etc) to have text entered as uppercase
automatically although the user might use title or lower case.

UPPER function cannot make cell look at itself and perform the function

Excel 2003

I've been poking around trying to figure this out but can't. The time of 9 hours, 15 minutes is being returned from a calculation but I want the cell to display the 9.25 hours instead. This seems like something simple on the surface, but apparently it's not. Any help would be appreciated!

i have a cell i have to check if it contains six characters. I have a list of data that i need to narrow down to six characters. I have successfully done that, but some of the cell has 5, 6, or 7 characters. The list contains about 600 cells, but i don't have time to format them individually. I want to create a formula that returns true or false if the cell contains 6 characters and false if it is above or below 6.

Can somebody help me, i'm new to excel!

Hi All,

I've been struggling with this for a while now and can't believe how hard it is!. I've searched on this site and on others to get some clarification but to no avail.

It's pretty simple really. I have a user form which contains a tex box for a user to input the date I want the format to be dd/mm/yyyy but can't find out how to set the format of the text box to this.

Please can someone give me a bit of guidence or link me to a good rescource if missed it in the search.

G

Good day... I need an IF Function that will allow me to action a time in a time range:

... If the time 04:16 falls in the time range 04:00 - 04:29, than put a one (1) in the filed x...
... If the time 04:16 doesn't fall in the time range 04:00 - 04:29, than leave the x fiel empty

Any help is appreciated.

I have an excel worksheet that adds two other worksheets in a data
triangle. I copied it to create a new data set and used find &
replace to change the worksheet references to the new ones.

The cells still contain the result of the old formula referring to the
previous worksheets. The only way I can get the formula to return the
correct result is to edit (F2) each cell and press enter. Calc now
(F9) does nothing.

I've seen this before, but this time, I need to calculate many
thousands of cells and don't have time for this workaround.

Any ideas?

Thanks.

Don S

I am trying to calculate time based off a non-conventional quarter hour time system

example;
8:00 to 8:07 = 8.0 hrs
8:08 to 8:23 = 8.25 hrs
8:24 to 8:38 = 8.5 hrs
8:39 to 8:53 = 8.75 hrs
8:53 to 8:59 = 9.0 hrs

I am having trouble writing an equation that would sum the clock-in and clock-out times (2 per day) and display the total time in these quarter hours and adding an additional hour if it is >= to *:53. Any help would be great.

I am attempting to figure out how to change the formula to automatically subtract a 30 minute lunch if the total time for the day exceeds 6 hours worked.

B value Time of day punch in: 9:30 AM
C value =IF(D11="","","-")
D value Time of Day punch out: 6:00 PM
E value =IF(D11="","",IF(D11