Close Window   
Free Ebook
Get Your Free Excel
ebook!
Our Top 15 Excel Tutorials
Instant Access!
E-mail:
Excel Forum

Vlookup Fill Down Copies Result Not Formula

Forum Register
Search Excel Forum Posts, Tutorials, Macros, Tips, and More

Hi Guys

I have the following in G2:

=VLOOKUP(A2,Sheet1!A:D,4,FALSE)

The formula returns the correct result, which in this case is a number - 2

When I fill down my range, the formula copies correctly, but every result is the same. 2.

However, if I go to the next cell down (G3) and activate it by pressing F2, and then hit Enter, the result changes and is now correct.

Any ideas whats going wrong?

View Answers     

Similar Excel Tutorials

Vlookup Partial Match in Excel
Return Vlookup results on partial matches of a cell's contents. You could type the start, end, or middle of a looku ...
Remove Vlookup #N/A Error in Excel
How to remove the #N/A error from Vlookup and replace it with a friendly message or a blank cell. Fix the Vlookup ...
Vlookup to Return the Min, Max, or Average Value in Excel
Perform a Vlookup that returns the highest value, lowest value, or average value from a dataset. Sections: Vlookup ...
Vlookup with a Range of Numbers in Excel
How to use the Vlookup function to return a result that falls within a range of numbers, such as a weight or quanti ...
Partial Match Lookup with Numbers in Excel
Perform lookups on numbers with partial matches. For instance, find the first number that starts with 12 in a list ...
Vlookup on Data with Spaces
How to use the Vlookup function when your data has extra spaces in it. This happens when the lookup data is import ...

Helpful Excel Macros

Vlookup Macro to Return All Matching Results from a Sheet in Excel
- This Excel Macro works like a better Vlookup function because it returns ALL of the matching results. Run the
Determine if a Cell Contains a Function in Excel - Great for Conditional Formatting and Validation - UDF
- Determine if a cell in Excel contains a formula or function with this UDF (user defined function). This function return
Hide Formulas in a Worksheet and Prevent Deletion
- This macro will hide all formulas within a workbook and not allow them to be deleted. The page will not be protected li
Complete Guide to Printing in Excel Macros - PrintOut Method in Excel
- This free Excel macro illustrates all of the possible parameters and arguments that you can include in the PrintOut Meth
Name Worksheets Based on Cell Contents
- This macro allows you to have your worksheets named by whatever is in a particular cell within a worksheet. This means

Similar Topics







I have a spreadsheet that when I copy the formula, it copies correctly
(changes the cells it should subtract), however, the result stays the same.
It matches the formula I copied it from, even though the cells to calculate
are now different. I even did a paste special and said only formula, but
still, same result. If I actually type in the formula, it works fine, but I
have a lot I need to copy and paste. Is there a way I can fix this?

Thanks,



I'm trying to write a formula that will automatically take a group of football (soccer) scores, compare them with a set of predictions, and then allocate points according to how close the predictions are to the actual scores.

E.g.
Manchester United 3 - 0 Arsenal
Prediction: 4 - 1
Points: 1

I've found a formula online that works for most scores; the correct score (e.g. 3 - 0), a correct win (e.g. 4 - 1), and in the case of a draw (e.g Man Utd 1 - 1 Arsenal, and the prediction 2 -2), correct draw (but not the correct score). The points are as follows: Correct draw (Prediction = result): 4 Correct win (Prediction = result): 3 Correct win, incorrect score (Winner correct, score not): 1 Correct draw, incorrect sco 1

The formula I found online for all but the correct draw is: =IF(A3&B3=C3&D3),3,IF(AND(A3=B3,C3=D3),1,IF(AND(A3>B3,C3>D3),1,IF(AND(A3<B3,C3<D3),1,0)))))

Could someone help me work out how I can write a formula to add before the above that will check the contents of four cells (the home score, away score, home prediction, away prediction), and if the number in all 4 cells are the same, allocate 4 points? I've tried using averages, but some combinations would void this. I've also used the SUM function, but the same happens, as with MULTIPLYING.

Something like =IF(A3:D3) are equal, 4,0

Below are a few examples of what I mean:
(Result) (Prediction) (Points)
A B C D E
3 - 3 3 - 3 4
2 - 1 3 - 1 1
1 - 0 1 - 0 3
3 - 3 2 - 2 1

Apologies in advance if I haven't explained this clearly enough.

Thanks

Will


I have entered a vlookup formula in a cell and it returns the correct value from the other worksheet. However when I copy the formula down it keeps returning the exact same value as the first cell. If I enter a formula in each individual cell it returns the correct value. Its driving me crazy ! I woyld be glad of any advice

Many Thanks

Karamazov


I have an excel worksheet that adds two other worksheets in a data
triangle. I copied it to create a new data set and used find &
replace to change the worksheet references to the new ones.

The cells still contain the result of the old formula referring to the
previous worksheets. The only way I can get the formula to return the
correct result is to edit (F2) each cell and press enter. Calc now
(F9) does nothing.

I've seen this before, but this time, I need to calculate many
thousands of cells and don't have time for this workaround.

Any ideas?

Thanks.

Don S



Ran into a problem I've never seen before. When dragging a cell across that contains a sum equation the result was the following cells with the same value. Inside the cell it showed what would be the correct new equation, but the value was still from the original cell. Any ideas on what's causing this?

If I double click the cell and then hit enter it will re-total the area and then give me the correct value, but I'd obviously rather is just work right the first time.


I have a very simple pivot table that I am trying to use as a data source for a VLOOKUP request. Unfortunately, every time I do it I get the result #NA. I have tried recreating the results from the pivot table in the worksheet next to it, and am able to use VLOOKUP on them successfully, but as soon as I point the VLOOKUP array to the pivot table, I get the #NA result

Can VLOOKUP be used on pivot tables? If so, is there any special syntax I need to use?

Thanks


Hi,

How do I enter the value in a cell (say B4) into a formula as a constant so it doesn't change when I copy it down the column?

For example,

B4 = 2.4 (a constant)

This is the result I want:

F6 =C8 + B4*4.243

F7 =C9 + B4*4.243

F8 =C10 + B4*4.243

B4 remains constant as I copy F6 down.

What's the correct formula for F6 so I can copy it down and keep B4 fixed?

Thanks.


Hi, can anyone help me with the below...

Im looking for a vlookup formula which will give me the maximum number from a list which contains multiple matches, i.e.

Lookup number 1 from column A, then give me the largest number from column B

example table:
A B
-----
1 5
2 2
1 11
3 2
4 5

the result would be 11

thanks all!


Hello

I'm quite experienced Excel user. I've never come across this problem but tinkering in every conceivable way within Excel settings and the solution has eluded me.

I have added a worksheet created elsewhere (it is a form I need printing, with the data coming from 2 sheets I have created from scratch) which has pre formatted cells for Date and Client Name etc.

When I try to reference the cell in this added sheet from my 2 sheets, instead of the result, it always displays the formula, not the result.

I have tried doing it from one of my sheets to reference to this new, and that displays the result and not formula. I can't imagine why it's doing this and I've never seen it happen before.

Formatting cells, giving cells names rather than the usually adequate of reference to the Cell Number doesn't change things. I wonder if I've picked up some legacy protection from the original form but can't see anywhere in the tools etc that's obvious.

There's about 50+ cells that need referencing and I got to get this done for work.

Please help me. This is my first need to post on a Excel Forum as I've always found help or answers from other peeps or internet but this one is making me scratch my head big time.



I have a co-worker's file that he is having trouble with. He is using Excel 2000 SP3. When copying a cell with a formula in it of "=D6+C6" and pasting it into the next cell down, it will display the same value in the cell as the calculated value from above, but has the correct formula displayed in the formula bar of "=D7+C7".

Example:
A1: 50
A2: 10
B1: 60
B2: 20

A3: Formula: =A1+A2 Displays: 60
Right click A3, Copy, right click B3, paste
A3 displays 60

When I click save, it will change the display value to 80.

I am trying this on his workstation and mine. Mine has Office 2010, so I think there might be an issue with the file itself.

Also, not just copy and paste. I can also just click the top cell after filling in the formula and then drag the bottom right of the cell downward and it will do the same of filling in the correct formula, but have the incorrect value.

I know that I could get him to just click save each time before really looking at the results, but that is just a band aid to the problem.

Any ideas how to fix this?


Today I ran into an odd problem. I typed in values for column A rows 1 through 10 then values for column B rows 1 through 10. then in column C, I made the formula C1=A1/B1. The math was correct it showed 542 in the C1 cell. So I dragged that formula down and it showed 542 in all column C cells which is not correct. And when I went to check to see if the formula was correctly dragged it was. For instance, the formula in C2 is =A2/B2 however the value of that cell showed 542 which was not the correct math/value.

But it gets even more weird. When I click on the Column C cells and then it shows the formula up top in the formula bar and if I put my cursor anywhere in the formula bar and hit Return the formula does not change however the correct value then appears in the Column C cell. It is like the act of putting the cursor in the formula activates it to work properly but until it is activated that C cell shows the value of the cell which it was dragged down from.

This is quite bizarre. Has anyone ever seen this before? I have no idea what is going on. I ran a scan for viruses and none were found. I tried it on several new/different spreadsheets but it keeps happening.

Thanks for any tips on this.


Great tip! But one thing: On my machine (Excel 2008 Mac), the values in the formula cell are not correctly calculated simply by dragging. Instead, the values are equal to the cell above (the first entry formula value). To get the correct value, I need to click in the formula bar and then hit enter. (I only discovered this after an hour of tinkering, figuring I had botched the formula!)

Are there any ways around this so that it updates upon dragging the formula?


Hello ,

Here is my issue:

I have a list of SKUs in Excel and I need to add one same word to 500 cells that have pre-existing text in the cells. See example below:

1) List of SKU's in cells:

34
35
39
55


2) text that needs to be added IN FRONT of every number:

DF

So the result would be:

DF34
DF35
DF39
etc.

How do I do that in a formula and not manually? I found another similar thread and I understand how to do it from the instructions there but the same text goes on the back and the result is: 34DF but I need it to be like: DF34.

I am using Office 2007 for mac.

Thank you for the help,
Chris


Hey guys,

I'm trying to write a macro which prints to PDF and saves the file name as the contents of a cell. I've been looking through all the posts currently on this forum to get something working. I'm using the following code -

Sub PrintPDF()
Filename = "C:\Documents and Settings\samb\My Documents\" & ActiveSheet.Range("Z1").Value
SendKeys Filename & "{ENTER}", False
ActiveWindow.SelectedSheets.PrintOut Copies:=1, ActivePrinter:= _
"Adobe PDF:", Collate:=True
End Sub

The macro prints to PDF, but then it stops at the Save As stage, where I have to manually enter the name of the file and click Save. I want the macro to automatically name the file with the contents of cell Z1. I then want it to then automatically press enter. Any ideas where I'm going wrong? Any help would be much appreciated!


I am trying to write a formula that uses both an if statement and a vlookup statement.

It's for a house cleaning price list, with two sets of prices. I want the formula to say if the value in E7 is R, i want to lookup the value for the house in the second column. If the value in the cell is anything else, i want to lookup the value for the house in the third column.

So in sense, my formula should look like =IF (E7=1,"=VLOOKUP(A10,'Clean Prices'!$A$2:$C$58,2,FALSE)","=VLOOKUP(A10,'Clean Prices'!$A$2:$C$58,3,FALSE)")

But it doesn't work. Is it possible to nest a vlookup in an if statement?


Hello Everybody,

I am hoping for some assistance. Here is what I have....

I am trying to get counts of certain values.

This is in the same workbook but different sheets.
On sheet 1 is where my formula lies. In a cell, I want it to look at sheet 2 column B and look for instances of "A", then I want it to look in the same row it found "A" and look at the value in column "N" and evaluate if there is an amount. If there isn't skip it and don't count it, if there is a value count it if it falls within a given range.

An example of the formula is below...what am I missing?

=COUNTIF(Sheet2!B:B,(VLOOKUP(A,Sheet2!B:N,13,FALSE)=0:500))
=COUNTIF(Sheet2!B:B,(VLOOKUP(A,Sheet2!B:N,13,FALSE)=501:1000))

Thank you in advance for your assistance.


I have set a VLOOKUP formula to match account numbers. How ever I have to
click double click on the cell before the formula recognises the account
number. I have to do this for each cell. I have tried different formats. It
is not saving me that much time.



Is there an Excel guru that can help with this - its related to "drop down menus"


I have 2 colombs of data.

AT the bottom of the first, I have created a drop down menu using the "data validation" feature in excel.

At the bottom of the second colomb, I have used an "IF" function that returns a result, which depends on what value is chosen from the drop down menu in colomb 1

The problem I have is that I want the TRUE result from the IF function to be another drop down menu, being the data in colomb 2.


How do you write an IF function where the TRUE result is a drop down menu??
I tried to create a drop down menu of colomb2 elsewhere in the spread sheet, and used that cells location as the TRUE value, but this didn't work either...

ANy suggestions??


Hello,

I need to know how to auto-fill text based on text in another cell. For
example:

Every time I enter "CHS" in Column B, I want Charleston to auto-fill in
Column C.
And when I enter "SAN", in Column B, I want San Diego to auto-fill in Column
C.

How can I set up a list like this? Any ideas?

Thanks!

Jason



I am looking for assistance in having one cell in a text format equals another cell that contains a time value in hh:mm format.

For example: Cell A1 has a time format (hh:mm) value of 04:00; which is the Start Time. I would like cell D1 to have a text format value of "04:00" (result is dependant upon what is entered in A1). I would duplicate the same formulas to reflect Stop Times in other cells.

My final result is to have another cell (F1) use the Concatenate formula to have the Start and Stop time shown in one cell as "04:00 - 12:30". The times would change based on the Time formated values entered into the Start and Stop time cells.

I have researched this in the board and found many excellent ways to do the opposite, but not convert Time format to Text format. Any assistance is greatly appreciated.

-Shane


How do I calculate the number of batches per hour? Here's what I have so far:

Cell B5: start time: 4:15 formatted as 4:15:00 am
Cell B6: finish time: 6:15 formatted as 6:15:00 am
Cell B7: total time: 2:00 formula in cell: =TEXT(B6-B5,"h:mm")
Cell B8: total batches processed: 22 (this is entered manually)
Cell B9: batches per hour: formula in cell: =B8/TEXT(B7,"h")

as long as I have this formula in cell B9 the answer comes out correct which should be 11 per hour.
If the formula in B9 is B8/B7, the answer is 264.0, Is this because of the way excel is reading the total time or the total time is formatted as a time, not an actual number? Is this the correct way to solve the problem?
answer should be 11 per hour.


Hi there. I'm using Excel 2007 and often use filters to find inconsistent data (mis-spellings, etc.) and then clean up the data using the fill handle to fill in correctly formatted values. I'm finding that, with a simple filter on, dragging over cells hidden by the filter changes the values in the hidden cells too. This is something I don't remember from my last version of Excel. I'm wondering if I've mis-remembered how this control works, or if there is a setting I can't find.

My goal is to drag and fill (or paste) in a colum with a range of rows wiht some hidden (filtered out) rows, and have the filtered out data be unaffected, if that makes sense.

Thanks!

T


Hello everyone, I am new to this forum and have been using excel for about 3 years. I have learned alot but still can not figure out how to make numbers add up in one box like a running total. Meaning, If I have a list and in the list is one cell for each item say like cell a1 is for a can of coke and cell a2 is for a car tire and so on,and i want to keep a running total by adding a number to cell a1 or a2 like say "3 i.e. 3 tires or cans of coke" and later that day i come back and need to add 2 more ......so i want to be able to just click on the cell a1 or a2 and enter the number 2 and the cell would add the number in it to the number im adding to it to show a result of 5 tires or whatever. I am sorry If i am not asking the question in an understandable manor but its the best way I can think to ask it.lol anyways, any help would be appreciated, Thanks in advance.


James


Hello,

I am new to using Excel and I am not very computer literate. I am looking for some help with a spreadsheet I am making. Here is the problem:

I have a column of 14 numbers in cells A1 to A14. If all of these values are less than 2%, I would like a "Pass" to display in cell B1. If any of these values are greater than 2% I would like a "Fail" to display in cell B1.

I have got a formula that works for a single cell but I can't figure out how to get it to apply to more than one cell. For example, I have entered =IF(A1<2,"Pass","Fail") in cell B1. Now if the value I enter in A1 is less than 2, it shows a "Pass", and if the value in A1 is greater than 2 it shows a "Fail" in cell B1. How can I get this to apply to all of the cells from A1 to A14?

If somebody could help me out that would be great.

Thanks,
Randy


I have set up an excel file that helps put together different text components using the vlookup and concatenate formulas for use in one plain text document .

When I try to paste the finished result into notepad/textpad/word it adds extra double quote marks throughout the text. Does anyone know how to paste it without these marks?

Thanks!