Copy/paste Part Of A Cell? 


Copy/paste Part Of A Cell?  Excel 
View Answers 
Hey guys,
I want to know how to copy part of a cell and paste it into a new cell.
Example:
a1= 8hAs7c
portion needed: 7c
I used this formula:
=RIGHT(A1,2)
This returns 7c like I want.
However in the next cell I want to source the middle two (As)
And in another cell I want the first two (8h)
How do I go about this?
I want to know how to copy part of a cell and paste it into a new cell.
Example:
a1= 8hAs7c
portion needed: 7c
I used this formula:
=RIGHT(A1,2)
This returns 7c like I want.
However in the next cell I want to source the middle two (As)
And in another cell I want the first two (8h)
How do I go about this?
Similar Excel Tutorials
Copy and Paste Data using Macro VBA in Excel
How to copy and paste data using a Macro in Excel. I'll show you multiple ways to do this, including across workshe ...
How to copy and paste data using a Macro in Excel. I'll show you multiple ways to do this, including across workshe ...
Remove Dashed Lines from Copy Paste VBA in Excel
How to remove the flashing dashes from a copy/paste range using VBA in Excel; this removes the dashed outline that ...
How to remove the flashing dashes from a copy/paste range using VBA in Excel; this removes the dashed outline that ...
Copy one range and paste in another range
Below is a macro, just copy and paste it into a module in your workbook and go from there.This macro uses message b ...
Below is a macro, just copy and paste it into a module in your workbook and go from there.This macro uses message b ...
Import a Worksheet from One Workbook to Another in Excel
In Excel, you can quickly copy an entire worksheet from one workbook to another workbook. This allows you to impor ...
In Excel, you can quickly copy an entire worksheet from one workbook to another workbook. This allows you to impor ...
Make Negative Numbers Positive in Excel and Vice Versa
I will show you a few ways to change negative numbers to positive numbers and back again in Excel. Don't forget to ...
I will show you a few ways to change negative numbers to positive numbers and back again in Excel. Don't forget to ...
Quickly Switch the Columns and Rows of a Data Set in Excel
How to switch a data set in Excel so that the columns become rows and the rows become columns. This will save you ...
How to switch a data set in Excel so that the columns become rows and the rows become columns. This will save you ...
Subscribe for Weekly Tutorials
Helpful tutorials delivered to your email!
Helpful Excel Macros
Replace Formulas with Values (For The Entire Workbook)
 This macro will convert every formula in an entire workbook into its respective value. This is basically a quick way to
 This macro will convert every formula in an entire workbook into its respective value. This is basically a quick way to
Excel Macro to Save a Specific Worksheet as a New File
 This Excel Macro allows you to save a specific worksheet within the Excel Workbook to its own new file. You will be a
 This Excel Macro allows you to save a specific worksheet within the Excel Workbook to its own new file. You will be a
Save the Current Worksheet as a New Excel Workbook File
 This Excel Macro will save the currently visible/active worksheet (the one that you see when you run the macro) to a
 This Excel Macro will save the currently visible/active worksheet (the one that you see when you run the macro) to a
Filter Data Sets on Multiple Columns with Multiple Criteria at Once in Excel  AutoFilter
 This Excel macro allows you to filter a data set on multiple columns and criteria at once. This means that you can filt
 This Excel macro allows you to filter a data set on multiple columns and criteria at once. This means that you can filt
Create a Bar Chart With a Macro in Excel
 Create a bar chart in Excel with this macro. You will be able to quickly and easily turn any range of numbers and data
 Create a bar chart in Excel with this macro. You will be able to quickly and easily turn any range of numbers and data
Similar Topics
Hi,
I use filters a lot at my work. One thing I've noticed is that if I have something filtered and want to copy and paste only what I see from one column to another column right next to it, it will copy what is filtered, but then paste into the unfiltered portion.
Is there some way to copy only what I see when it's filtered, THEN paste only onto the adjancent cells which is also filtered?
For example let's say i have each of the number below in a cell (Fig 1). And then I hide rows 2 3, so only 1 and 4 is showingI only see 1 & 4 in column A. I want to copy and paste 1 and 4 to the next column over one row so it looks like Fig. 2 when unhidden. Not like Fig. 3.
Fig. 1
1
2
3
4
Fig. 2
1 1
2
3
4 4
Fig. 3
1 1
2 4
3
4
I use filters a lot at my work. One thing I've noticed is that if I have something filtered and want to copy and paste only what I see from one column to another column right next to it, it will copy what is filtered, but then paste into the unfiltered portion.
Is there some way to copy only what I see when it's filtered, THEN paste only onto the adjancent cells which is also filtered?
For example let's say i have each of the number below in a cell (Fig 1). And then I hide rows 2 3, so only 1 and 4 is showingI only see 1 & 4 in column A. I want to copy and paste 1 and 4 to the next column over one row so it looks like Fig. 2 when unhidden. Not like Fig. 3.
Fig. 1
1
2
3
4
Fig. 2
1 1
2
3
4 4
Fig. 3
1 1
2 4
3
4
I am trying to do a very simple copy and paste of a simple formula in Excel 2007 and nothing seems to be working. Excel will not let me copy and paste a formula and will only paste the value into to workbook. For instance, if I make a very simple spreadsheet such as:
A1 type in 10, A2 type in =A1 (calculated A2 to be 10)
B1 type in 5
And then click the copy on B1, and then click paste special on cell B2, the only options it gives me are text and unicode text and so no matter how I paste, cell b2 will always be populated with a value of 5. I cannot imagine a simpler copy and paste and no matter what I do I can't make this work.
All cells are formatted as general. It seems that all copy and pasting of formulas in my excel has been disabled. If I open any spreadsheet on my computer, I can't copy and paste formulas, but do the exact same thing on the exact same spreadsheet on any other computer and it works no problem.
Any help?
A1 type in 10, A2 type in =A1 (calculated A2 to be 10)
B1 type in 5
And then click the copy on B1, and then click paste special on cell B2, the only options it gives me are text and unicode text and so no matter how I paste, cell b2 will always be populated with a value of 5. I cannot imagine a simpler copy and paste and no matter what I do I can't make this work.
All cells are formatted as general. It seems that all copy and pasting of formulas in my excel has been disabled. If I open any spreadsheet on my computer, I can't copy and paste formulas, but do the exact same thing on the exact same spreadsheet on any other computer and it works no problem.
Any help?
Hi guys,
Looking for some help and would appreciate your help. I want to prevent people cutting/copy/pasting on a spreadsheet I have developed. A couple of users keep doing so which in turn knackers my formulas. There will be occasions where I will need to be able to use these functions for maintenance and updates. Ideally I would like have a private marcro which I can run to enable these features as and when needed.
I've been at this all morning and feel like I'm going round in circles. I've tried various bits of code (sourced via google etc) & have ended up with a whole manner of outcomes but not the one I want.
To summaraise what I am looking for is some vba code which will do the following Disable cut,copy and paste when sheet is opened Enable cut,copy and paste when closed Have a macro which when run will allow me to cut/copy paste so as to implement updates when necessary.
Can anyone help?
Thanks in advance
Looking for some help and would appreciate your help. I want to prevent people cutting/copy/pasting on a spreadsheet I have developed. A couple of users keep doing so which in turn knackers my formulas. There will be occasions where I will need to be able to use these functions for maintenance and updates. Ideally I would like have a private marcro which I can run to enable these features as and when needed.
I've been at this all morning and feel like I'm going round in circles. I've tried various bits of code (sourced via google etc) & have ended up with a whole manner of outcomes but not the one I want.
To summaraise what I am looking for is some vba code which will do the following Disable cut,copy and paste when sheet is opened Enable cut,copy and paste when closed Have a macro which when run will allow me to cut/copy paste so as to implement updates when necessary.
Can anyone help?
Thanks in advance
I have a coworker's file that he is having trouble with. He is using Excel 2000 SP3. When copying a cell with a formula in it of "=D6+C6" and pasting it into the next cell down, it will display the same value in the cell as the calculated value from above, but has the correct formula displayed in the formula bar of "=D7+C7".
Example:
A1: 50
A2: 10
B1: 60
B2: 20
A3: Formula: =A1+A2 Displays: 60
Right click A3, Copy, right click B3, paste
A3 displays 60
When I click save, it will change the display value to 80.
I am trying this on his workstation and mine. Mine has Office 2010, so I think there might be an issue with the file itself.
Also, not just copy and paste. I can also just click the top cell after filling in the formula and then drag the bottom right of the cell downward and it will do the same of filling in the correct formula, but have the incorrect value.
I know that I could get him to just click save each time before really looking at the results, but that is just a band aid to the problem.
Any ideas how to fix this?
Example:
A1: 50
A2: 10
B1: 60
B2: 20
A3: Formula: =A1+A2 Displays: 60
Right click A3, Copy, right click B3, paste
A3 displays 60
When I click save, it will change the display value to 80.
I am trying this on his workstation and mine. Mine has Office 2010, so I think there might be an issue with the file itself.
Also, not just copy and paste. I can also just click the top cell after filling in the formula and then drag the bottom right of the cell downward and it will do the same of filling in the correct formula, but have the incorrect value.
I know that I could get him to just click save each time before really looking at the results, but that is just a band aid to the problem.
Any ideas how to fix this?
Hi,
How do I enter the value in a cell (say B4) into a formula as a constant so it doesn't change when I copy it down the column?
For example,
B4 = 2.4 (a constant)
This is the result I want:
F6 =C8 + B4*4.243
F7 =C9 + B4*4.243
F8 =C10 + B4*4.243
B4 remains constant as I copy F6 down.
What's the correct formula for F6 so I can copy it down and keep B4 fixed?
Thanks.
How do I enter the value in a cell (say B4) into a formula as a constant so it doesn't change when I copy it down the column?
For example,
B4 = 2.4 (a constant)
This is the result I want:
F6 =C8 + B4*4.243
F7 =C9 + B4*4.243
F8 =C10 + B4*4.243
B4 remains constant as I copy F6 down.
What's the correct formula for F6 so I can copy it down and keep B4 fixed?
Thanks.
We have a number of Excel users in our office who cannot copy and paste
between Excel workbooks. They can copy and paste between worksheets. When
you highlight the section to copy and then go to the new workbook both the
paste
and paste special are "grayed out". This is true whether you rightclick the
mouse, go to the edit menu, or use control keys. This occurs with any data
type and the most simple workbooks. I have seen some suggestions here but
none have worked for this particular problem. I have reset the menus and
renamed the .xlb files and neither helps. You can open the clipboard and the
paste will work, but there is no paste special option. Any help would be
greatly appreciated. Thanks!
between Excel workbooks. They can copy and paste between worksheets. When
you highlight the section to copy and then go to the new workbook both the
paste
and paste special are "grayed out". This is true whether you rightclick the
mouse, go to the edit menu, or use control keys. This occurs with any data
type and the most simple workbooks. I have seen some suggestions here but
none have worked for this particular problem. I have reset the menus and
renamed the .xlb files and neither helps. You can open the clipboard and the
paste will work, but there is no paste special option. Any help would be
greatly appreciated. Thanks!
I did a search in here but didn't find an answer so here goes nothing...
I have a spreadsheet with data from A1 to H1 down to A275 to H275. I select all of it, Copy, go into the Sheet2 tab and select A1, Paste Special > Transpose and it give me the following error message:
Quote:
The information cannot be pasted because the Copy area and the paste area are not the same size and shape. Try one of the following:
 Click a single cell, and then paste.
 Select a rectangle that's the same size and shape, and then paste.
For the life of me, I can't figure out why it's not working! I have done this many times with other spreadsheets. Has anyone ever experienced this? If so, were you able to resolve it and how?
Many Thanks,
Mike
I have a spreadsheet with data from A1 to H1 down to A275 to H275. I select all of it, Copy, go into the Sheet2 tab and select A1, Paste Special > Transpose and it give me the following error message:
Quote:
The information cannot be pasted because the Copy area and the paste area are not the same size and shape. Try one of the following:
 Click a single cell, and then paste.
 Select a rectangle that's the same size and shape, and then paste.
For the life of me, I can't figure out why it's not working! I have done this many times with other spreadsheets. Has anyone ever experienced this? If so, were you able to resolve it and how?
Many Thanks,
Mike
I have entered a vlookup formula in a cell and it returns the correct value from the other worksheet. However when I copy the formula down it keeps returning the exact same value as the first cell. If I enter a formula in each individual cell it returns the correct value. Its driving me crazy ! I woyld be glad of any advice
Many Thanks
Karamazov
Many Thanks
Karamazov
Hello All
I wonder if you could help with this one, I have a list of data like this (no spaces or other characters)
JN551122B
What I need to do is split each of the characters in to its own cell
if JN551122B was in cell A1 I'd want to return:
B2 C2 D2 E2 F2 G2 H2 I2 J2
J N 5 5 1 1 2 2 B
The nearest I have got is the right function, but it brings over the preceeding characters, and I need each character in its own cell. Hopefully I could copy/paste a formula and change the reference for each cell value, i.e. 1 would return J, 2 = N, 3 = 5, 4 = 5 etc.
Thanks for your help!
I wonder if you could help with this one, I have a list of data like this (no spaces or other characters)
JN551122B
What I need to do is split each of the characters in to its own cell
if JN551122B was in cell A1 I'd want to return:
B2 C2 D2 E2 F2 G2 H2 I2 J2
J N 5 5 1 1 2 2 B
The nearest I have got is the right function, but it brings over the preceeding characters, and I need each character in its own cell. Hopefully I could copy/paste a formula and change the reference for each cell value, i.e. 1 would return J, 2 = N, 3 = 5, 4 = 5 etc.
Thanks for your help!
Hi
I am a new user and trying to setup a database in excel. I can select all addresses and copy but when trying to paste into excel it does so in 1 cell.
Is there a way I can paste the separate email id's into individual cells so I don't have to do it individually?
Many thanks
Patrick
I am a new user and trying to setup a database in excel. I can select all addresses and copy but when trying to paste into excel it does so in 1 cell.
Is there a way I can paste the separate email id's into individual cells so I don't have to do it individually?
Many thanks
Patrick
I was testing the following methods (suggested in another thread) to disable copy/paste on a particular worksheet  now copy and paste is disabled entirely from Excel and, apparently, from each and every excel workbook I've got. HELP!!!!!
http://www.xcelfiles.com/VBA_Quick13.html
http://www.mrexcel.com/archive2/75500/87639.htm
Taxstar
http://www.xcelfiles.com/VBA_Quick13.html
http://www.mrexcel.com/archive2/75500/87639.htm
Taxstar
I have cells in a column, some colored yellow, some not. I am trying to use
the SUMIF function to sum only the cells in the range that are colored. Can
this be done? Can I enter something in the "criteria" part of the formula
that can do this?
=SUMIF(D3:D13,"criteria",D3:D13)
I also tried to use the CELL function's color feature, but I couldn't get it
to work right. I don't know how to get Excel to recognize if a cell is
colored in a formula.
=CELL("color",cell)
It might just be that I don't know what this means in Help:
"color" > 1 if the cell is formatted in color for negative values;
otherwise returns 0 (zero).
Can anyone help?
the SUMIF function to sum only the cells in the range that are colored. Can
this be done? Can I enter something in the "criteria" part of the formula
that can do this?
=SUMIF(D3:D13,"criteria",D3:D13)
I also tried to use the CELL function's color feature, but I couldn't get it
to work right. I don't know how to get Excel to recognize if a cell is
colored in a formula.
=CELL("color",cell)
It might just be that I don't know what this means in Help:
"color" > 1 if the cell is formatted in color for negative values;
otherwise returns 0 (zero).
Can anyone help?
Newbie here and I don't know where to start... I'm trying to set up a macro to when data is pasted to a TEMPLATE worksheet tab it will automatically copy and paste data to another sheet based on the month value.
For example:
If data contains 06/01/2011 in cell A1, then data needs to be pasted to "Jun" worksheet within the same workbook.
Can someone assist or can give some direction? Thank you
For example:
If data contains 06/01/2011 in cell A1, then data needs to be pasted to "Jun" worksheet within the same workbook.
Can someone assist or can give some direction? Thank you
I have a spreadsheet that when I copy the formula, it copies correctly
(changes the cells it should subtract), however, the result stays the same.
It matches the formula I copied it from, even though the cells to calculate
are now different. I even did a paste special and said only formula, but
still, same result. If I actually type in the formula, it works fine, but I
have a lot I need to copy and paste. Is there a way I can fix this?
Thanks,
(changes the cells it should subtract), however, the result stays the same.
It matches the formula I copied it from, even though the cells to calculate
are now different. I even did a paste special and said only formula, but
still, same result. If I actually type in the formula, it works fine, but I
have a lot I need to copy and paste. Is there a way I can fix this?
Thanks,
When using the copy and paste function it is extremely slow to paste the
result. Also the file size seems to be increasing to a much larger size for
no reason.
Any feedback would be appreciated.
result. Also the file size seems to be increasing to a much larger size for
no reason.
Any feedback would be appreciated.
Suddenly, I lost the ability to use copy and paste by right clicking my
mouse. Using Office 2000. Can you help? Thank you!!!
mouse. Using Office 2000. Can you help? Thank you!!!
I am trying to establish a formula, but not too sure how.
For example " If Cell A5 has been marked with ' X ', then copy what is in Cell A6 to
cell C25 "
For example " If Cell A5 has been marked with ' X ', then copy what is in Cell A6 to
cell C25 "
Can you put a diagonal line in a cell and then color one part of it one color and the ther part of it another color?
Hi everyone,
I'm going nuts trying to figure out how to autofill text from one cell
to another. For example, everytime I type text into cell A20, I want
the exact same thing to cell BL20. The same for B20, BL20, etc.
How do I go about that? I already know how to copy formulas from one
cell to another by dragging the skinny black line of the cell. I guess
I just need the formula for a simple IDENTICAL copying of text.
Thanks in advance,
Mike
I'm going nuts trying to figure out how to autofill text from one cell
to another. For example, everytime I type text into cell A20, I want
the exact same thing to cell BL20. The same for B20, BL20, etc.
How do I go about that? I already know how to copy formulas from one
cell to another by dragging the skinny black line of the cell. I guess
I just need the formula for a simple IDENTICAL copying of text.
Thanks in advance,
Mike
Dear Sirs,
Am in need for this solution very badly and what could be a better place than excelforum !
I have an MS Excel File (2007 version) sample file attached, which has name, designation, blood group and so on. The last column is for hyperlinking photographs of individuals.
In the same folder where I have saved this excel file, are lying photographs of individuals. While scanning the photographs, I have saved them serially i.e. 1,2,3 and so on.
In the Excel file, in last column, I have given the respective serial numbers. In order to hyperlink one has to select that particular Cell, press Ctrl K and you automatically go to the folder containing individual photographs, you select that photo and OK.
Problem :
I have to do this hyperlinking one by one and if there 1000 photos, lot of time is wasted.
Solution Needed :
Just in case of excel formula, which we copy and paste, Can I get a command by virtue of which the column titled Photo or column next to it gets automatically Hyperlinked to respective photo WHEN I copy and paste such command to all cells in that column.
Thanks a million and warm regards ::: Jack
Am in need for this solution very badly and what could be a better place than excelforum !
I have an MS Excel File (2007 version) sample file attached, which has name, designation, blood group and so on. The last column is for hyperlinking photographs of individuals.
In the same folder where I have saved this excel file, are lying photographs of individuals. While scanning the photographs, I have saved them serially i.e. 1,2,3 and so on.
In the Excel file, in last column, I have given the respective serial numbers. In order to hyperlink one has to select that particular Cell, press Ctrl K and you automatically go to the folder containing individual photographs, you select that photo and OK.
Problem :
I have to do this hyperlinking one by one and if there 1000 photos, lot of time is wasted.
Solution Needed :
Just in case of excel formula, which we copy and paste, Can I get a command by virtue of which the column titled Photo or column next to it gets automatically Hyperlinked to respective photo WHEN I copy and paste such command to all cells in that column.
Thanks a million and warm regards ::: Jack
Hi all,
I have some formulae in A1, is it possible for cell B1 to display the value only of A1 without the link to the formulae. I dont want to have to run a macro, or paste values, more of a formula that could be assigned to cell B1 so whenever A1 is changed, so is B1 automatically.
Thanks,
Pedro.
I have some formulae in A1, is it possible for cell B1 to display the value only of A1 without the link to the formulae. I dont want to have to run a macro, or paste values, more of a formula that could be assigned to cell B1 so whenever A1 is changed, so is B1 automatically.
Thanks,
Pedro.
I would like to copy a small table from Word into one cell in an Excel
worksheet. The first column of the table is a list of numbers. I tried
converting the table into text with manual line breaks and tab stops to
divide columns and rows, but that didn't solve my problem.
Excel pastes the data into several rows. When I try to merge them, I
get a warning that the selection contains multiple data values, and
merging into one cell keeps the upperleft most data only.
What I tried that didn't work:
* Formatting the Excel cells as text before pasting the data.
* The various options for "Paste Special." The closest I got was
inserting the table as a Document Object, which could be a workaround,
I guess.
What I am saving for when all else fails:
* The obvious solution of copying row by row into one Excel cell.
The data in the table is information about my dad's medications. I
would like to have reference charts of how to identify the strength of
each tablet by its color and markings. I got the info from the
manufacturers' websites and entered it into tables in Word, which I
would like to copy into a more comprehensive file I am creating in
Excel. The first column of each table is the strength of the tablet,
entered as 1 mg., 2 mg., etc. The subsequent columns describe the
shape, color, and markings. There are 3 tables, each with about 45
rows.
Is there a way to copy each one  whether as a table or as text  into
a single Excel cell without losing data?
Many thanks.
worksheet. The first column of the table is a list of numbers. I tried
converting the table into text with manual line breaks and tab stops to
divide columns and rows, but that didn't solve my problem.
Excel pastes the data into several rows. When I try to merge them, I
get a warning that the selection contains multiple data values, and
merging into one cell keeps the upperleft most data only.
What I tried that didn't work:
* Formatting the Excel cells as text before pasting the data.
* The various options for "Paste Special." The closest I got was
inserting the table as a Document Object, which could be a workaround,
I guess.
What I am saving for when all else fails:
* The obvious solution of copying row by row into one Excel cell.
The data in the table is information about my dad's medications. I
would like to have reference charts of how to identify the strength of
each tablet by its color and markings. I got the info from the
manufacturers' websites and entered it into tables in Word, which I
would like to copy into a more comprehensive file I am creating in
Excel. The first column of each table is the strength of the tablet,
entered as 1 mg., 2 mg., etc. The subsequent columns describe the
shape, color, and markings. There are 3 tables, each with about 45
rows.
Is there a way to copy each one  whether as a table or as text  into
a single Excel cell without losing data?
Many thanks.
Hello,
I am copying charts to display the same information for different regions. When I work on the copied region, I find it a cumbersome task to go through each charts source data and change the cell references to the different region. Essentially I am doing a trending analysis for each region, with a region having its own sheet with 5 charts per sheet. What I have done is copy the original sheet and am updating the sheet for another regions source data by going to the source data. The source data is all in the same row/column format, but each regions source data has its own sheet. Is there a more automatic way to do this? Perhaps a way to update all 5 charts references at the same time.
I am copying charts to display the same information for different regions. When I work on the copied region, I find it a cumbersome task to go through each charts source data and change the cell references to the different region. Essentially I am doing a trending analysis for each region, with a region having its own sheet with 5 charts per sheet. What I have done is copy the original sheet and am updating the sheet for another regions source data by going to the source data. The source data is all in the same row/column format, but each regions source data has its own sheet. Is there a more automatic way to do this? Perhaps a way to update all 5 charts references at the same time.
From limited experience I know that excel calculates dates via serial numbers.
I have formulas to add a number of days to a cell containing an entered date and display the resulting new date (ie. 03/01/2011 (c34)+11 = 03/12/2011)
I am seeking to leave resulting formula cell blank until a date is entered in the input cell. Currently when the input cell is empty the formula cell obviously displays 1/11/1900 using the above example.
What conditional format would achieve leaving the formula cell blank until date data in entered into the source cell?
Hopefully a simpler question for your experience level than mine.
I have formulas to add a number of days to a cell containing an entered date and display the resulting new date (ie. 03/01/2011 (c34)+11 = 03/12/2011)
I am seeking to leave resulting formula cell blank until a date is entered in the input cell. Currently when the input cell is empty the formula cell obviously displays 1/11/1900 using the above example.
What conditional format would achieve leaving the formula cell blank until date data in entered into the source cell?
Hopefully a simpler question for your experience level than mine.
Entering time values in custom format [h]:mm:ss
Cells accept hours over 23,
Adding cells in column returns correct total time.
Have not found a way to multiply these cells by a $ hourly rate.
So use HOUR(cell ref) and MINUTE(cell ref) to capture values in referenced
cell  then use these values to calculate total payment for $rate per hour.
However, the HOUR(cell ref) formula returns the hours in excess of 24 when
the cell contains an hour value in excess of 23 (ie 27 hours returns 3).
Cells accept hours over 23,
Adding cells in column returns correct total time.
Have not found a way to multiply these cells by a $ hourly rate.
So use HOUR(cell ref) and MINUTE(cell ref) to capture values in referenced
cell  then use these values to calculate total payment for $rate per hour.
However, the HOUR(cell ref) formula returns the hours in excess of 24 when
the cell contains an hour value in excess of 23 (ie 27 hours returns 3).