Close Window   
Free Ebook
Get Your Free Excel
ebook!
Our Top 15 Excel Tutorials
Instant Access!
E-mail:
Excel Forum

Line Graph Problem: Remove Line Going To Zero

Forum Register
Search Excel Forum Posts, Tutorials, Macros, Tips, and More

I have a graph with various information in it. One is a line graph that tracks hours used in that department per month. The problem is that when it gets to the last month, and there is not yet data for future months, the line goes down to Zero (leavin this big diagonal line that makes the data look funny). I need this line to stop on the last month there is data for. (I do not manually enter the data, it is a formula that I do not wish to delete.) I know I can manually move the data that the line is pulling to make it stop on the last month, but I have a graph for 36 different departments and that's a pain to have to manually adjust 36 graphs each month. Is there a way to tell the line to stop if there is no data? Thanks!!

View Answers     

Similar Excel Tutorials

Connect the Line for a Chart in Excel and Skip Blanks
How to prevent a line chart from having a blank spot or also dropping to zero when there is a blank cell or a zero ...
How to Add a New Line to a Message Box (MsgBox) in Excel VBA Macros
I'll show you how to create a message box popup window in Excel that contains text on multiple lines.  This allows ...
Add, Manage, & Remove Trendlines in Charts in Excel
How to add, manage, and remove trendlines in Excel Trendlines allow you to show trends in charts that might be oth ...
Copy one range and paste in another range
Below is a macro, just copy and paste it into a module in your workbook and go from there.This macro uses message b ...
Do Something Every so Many Rows with a Macro in Excel
How to have a macro do something on a set interval of rows; for instance, input a value every 5 rows. Sections: The ...
Reset All Values in a UserForm
Clear or reset all values in a UserForm so that they contain only the default original values. This method will rem ...

Helpful Excel Macros

Create a 12 Month Calendar With The Current Day Highlighted in Excel
- Create a 12 month formatted calendar on a new tab in Excel with the current day highlighted. This macro creates a nicel
Create a Line Chart with a Macro in Excel
- Create a line chart in Excel with this macro. This allows you to quickly and easily create line charts and graphs from
Format Cells in The Short Date Number Format in Excel
- This free Excel macro applies the Short Date number format to a selection of cells in Excel. This number format display
Combine Multiple Workbooks into One
- This macro for Microsoft Excel allows you to combine multiple workbooks and worksheets into one new workbook and workshe
Highlight Cells with Text or Formulas (non-empty cells)
- This macro will highlight all cells in excel which are not empty. This means that if a cell contains formulas, text, nu

Similar Topics







Morning all,

Say I had a line graph for 4 years and I wanted it to be a solid line for the first three and a dashed line for the last one, is that possible?

Many thanks for your help


Hey everyone,

I'm really hoping someone can help me with this...

I need to plot percentages over time in a line graph in excel. I don't want to have to do a percentage equation in the spreadsheet, I just want excel to take two sets of values and display the percentage in the chart. For example, I need B1 as a percentage of B2 for week 1, C1 as a percentage of C2 for week 2, etc....
Can someone please offer a suggestion for how to do this? I would really appreciate it.
Also, would it be possible to link data from other sheets in the workbook into one single chart?


I am puzzled by a thin black line (that looks like a border line) on a spreadsheet that I am unable to remove, whatever I do. It starts halfway across column B and stops just at the end of column Z.
It is not a border line.
It is not a page break.
If I delete the rows it appears on it remains visible.
It is not an object floating on top of the spreadsheet.
Any ideas?
Thanks.


Regarding Charts in Excel:

Is there a way to have the Min and Max values adjusted dynamically for the Scale of the values being displayed ??

I know that I can use named ranges to display various sections of data -- month by month, or quarter by quarter, for example.

But when the value of these ranges vary greatly from section to section I end of having to manually go and adjust the Min and Max values of the chart scale.

For example, if I was looking at a graph of the S&P 500's prices last November, a Min and Max range of 750 to 1200 would be fine. But if I had a dynamic range established and scrolled over to view the S&P 500's prices for this past February, I would need a Min and Max range of around 650 to 850.

Is there a way to have these Min & Max values adjust automatically depending on the values being displayed ??

Thanks

StanSz


I have a userform containing a multicolumn listbox (ListBox1) and textbox (txtSelectedJobNumber).

When a user clicks on a line in the listbox I want to automatically copy the text in the 3rd column of the selected line to the textbox.

If anyone could provide code which would allow me to do this I would be grateful

Thanks

Colin


This may be less of an Excel question than a general data display question, but I'll try here.

I have 3 variables that I'm charting. I have one on the primary axis and it's values are in the billions. I have one on the secondary axis and it's a percentage. I need to display a 3rd who's value is in the millions. If I put it on the primary axis, you cannot see modest changes.

Is there a tricky way to get all three on one graph? I know I could split on two graphs, so that's my backup plan.

Thanks,

Dave


So I've got some data, which has the approximate form of a sine function. I want to find all the x-axis intercepts. I tried using the intercept function and swapping around the y values for the x values, but it only returns 1 value (so I'd guess it uses a linear regression to estimate a single line through the axis).

I was thinking of trying a nested if/and statement but I haven't quite figured out how to do it. Basically I want to identify the two values where it switches from positive to negative and also indentify the values where it goes negative to positive, I can then fit a straight line between them to find a better approximation of the intercept (though it might not be necessary). Preferably I'd like it all one function as I'm not doing it in VBA (I might do later though, we'll see).

Can anyone suggest how I'd find these value or the x-intercept. Any help would be greatly appreciated.


Okay, so I tried (for hours) to find a solution to this and have finally gotten frustrated to the point where i think asking here will be my best bet.


Basically I want to export data from excel worksheets to various places on a word document I had. I have created a word template as well as bookmarks for that template, as that seems to be the recommendation for performing such a task with excel.

My problem is ... Now what?

I basically have 1 constant worksheet that contains all my affiliates info (Name, Address etc), which i'd like to use to populate some bookmarks in my word template, and then i have another worksheet for the previous month, indicating sales etc for that affiliate. I intend on adding a new worksheet every month that i would use to create new invoices.

Furthermore, i'd really like to be able to update a new file (or perhaps a new page on the same file) for each company with the use of a button, similar to the one's you'd see in an access form.

Can anyone help? Let me know if you need me to clarify.

Thanks!

Matt


I'm working on a speadsheet that has thousands of line items with lots of great information, but not in the fields I need them to be in. Is there a formula to move for example cell contents A26 to B25 and D26 to F27? Also I have contents in one cell that I need to break apart is there a formula for that too? I searced the help and the net an came up with nothing. Maybe I'm not wording it correctly, but I'd appreciate the help.


I want to add data points to the scatter plot that are not part of the data
ie. add points to find their concentration on a standard curve.



I am using the code below to disable the save function very successafully. However, is there a work around to allow a macro to save?
----------------------------------------------------------------------
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)

'this disables the save function on the XLS

MsgBox "****Save is Disabled****"
' Following line will prevent all saving
Cancel = True
' Following line will prevent the Save As Dialog box from showing
If SaveAsUI Then SaveAsUI = False
End Sub


Hello,

I have two columns of data: column A contains the date and time in the form dd/mm/yyyy. Column B contains a number value. All the times are in order, so column A looks like:

01/01/2007
02/01/2007
03/01/2007

I have data from 2007 to 2010. I need to calculate an average daily value (in column B) for each month, and display it in column C. So, for January, I need to calculate the average of 31 days, February, 28 days, etc.

Is there a function I can use to do this? I've been trying the AVERAGEIF formula but can't get it to work. Any ideas would be much appreciated!

Many thanks,
Caitlin


Can you put a diagonal line in a cell and then color one part of it one color and the ther part of it another color?


Very new in this board. If I post this question in the wrong forum please bear with me.
There is about 20 staffs in our department and I have made a spreadsheet with 12 tabs for each month of the year Jan-Dec. If each staff have 15 days annual leave each year and how can I make a formular that can automatically calculate the balance of annual leave and entered in the tabs of the following months. For example if staff A used 5 days in Jan how can the balance of 10days be entered in the tabs from Feb-Dec. If he use another 5 days in July the remain balance of 5 days be automatically entered in the tab from Aug to Dec. Likewise if staff A took 2 days sick leave in Jan, and 2 days in Mar how can this sick days be automatically sum up in the months after. I am doing this manually at the moment and it is very time consuming and also very easy to make mistake.
Thanks and sorry for this long questions


I've been using Excel for years and had very few issues. However, I recently went into a spreadsheet to update it and was unable to select and enter data into an individual cell. When I click on a cell and try to enter #s nothing happens (my num lock is on). Then when I try to click into another cell it just highlights that cell, along with any other that I move my cursor over. Once I click on one cell I can't stop the highlighting from happening. I can't even click on anything in the toolbar. I am extremely confused, can anyone help?


I would like to copy a small table from Word into one cell in an Excel
worksheet. The first column of the table is a list of numbers. I tried
converting the table into text with manual line breaks and tab stops to
divide columns and rows, but that didn't solve my problem.

Excel pastes the data into several rows. When I try to merge them, I
get a warning that the selection contains multiple data values, and
merging into one cell keeps the upper-left most data only.

What I tried that didn't work:
* Formatting the Excel cells as text before pasting the data.
* The various options for "Paste Special." The closest I got was
inserting the table as a Document Object, which could be a workaround,
I guess.
What I am saving for when all else fails:
* The obvious solution of copying row by row into one Excel cell.

The data in the table is information about my dad's medications. I
would like to have reference charts of how to identify the strength of
each tablet by its color and markings. I got the info from the
manufacturers' websites and entered it into tables in Word, which I
would like to copy into a more comprehensive file I am creating in
Excel. The first column of each table is the strength of the tablet,
entered as 1 mg., 2 mg., etc. The subsequent columns describe the
shape, color, and markings. There are 3 tables, each with about 4-5
rows.

Is there a way to copy each one - whether as a table or as text - into
a single Excel cell without losing data?

Many thanks.




I have the code which filters my spreadsheet and copies that dataset but I think I need to add an IF that skips the copy line when the criteria is not met. Any ideas?

Thanks all!!


Newbie here and I don't know where to start... I'm trying to set up a macro to when data is pasted to a TEMPLATE worksheet tab it will automatically copy and paste data to another sheet based on the month value.
For example:
If data contains 06/01/2011 in cell A1, then data needs to be pasted to "Jun" worksheet within the same workbook.

Can someone assist or can give some direction? Thank you


Is there a way to force Excel to stop calculating a formula?
Excel showing "Not Responding" and is grayed out. I've tried to use Task Manager to stop the application, but as soon as open up Excel it goes right back to opening the spreadsheets and starts calculating again. I have spreadsheets saved, so don't have to recover.
thanks...Dean


Hello all,

Until now I have been able to find all my answers through searches. As a VBA novice, it has been very helpful. I am stumped on this one, however. I am trying to autofill from the selected cell in Column C down. I would like it to stop at the last cell with data in Column B. This is the code I have so far:

Range("C2").Select
Selection.AutoFill Destination:=Range(Selection, Selection.End(xlDown))

This does the autofill, but doesn't stop at the last cell with data in Column B.

In the past I have use this code to acheive similar results:

Dim endRow As Long
endRow = Cells(Rows.Count, "B").End(xlUp).Row
Range("C2").AutoFill Destination:=Range("C2:C" & endRow)

The problem with this code is that I will not always be starting in "C2". I need code that uses whatever the selected cell is.

All help is appreciated. Thanks!


Dear Sir,

If any one could give me a solution for this its will be a great help for me.

I am working in a bank and on every day we receive Month to date data of Loans and advances made by every branch with Region wise total and manager wise total. With Sum of loan and count of loan. In our MIS format the in A coulum branches are sorted and listed in a sequence with sub total Region. I have data where if if do the pivot and change the data the out put should be displayed accordingly in the MIS format. Can any one help me how can we do this or is there any other office addins/softwares are available if so the data is changed on a daily basis and if we do the pivot it will automatically copy the data to the MIS format.

Thanks.


Hi. I have a row in a spreadsheet in Excel that is hidden but i am unable to unhide it. I have tried the usual way by hovering between the rows above and below until i get the double line but this does not happen. I have also tried going through the Format - Row - Unhide option but this also doesn't work. Any suggestions?


Hi,

I am entering lots of family history data into a spreadsheet. At the simplest I have columns (in cells A1 B1 C1) the headings, Surname, Forename, Year. Right now, I enter in cells A2 B2 and C2 say: Smith <Tab> John <Tab> 1555 <Enter, move mouse to the A column in the next row down). What I want to happen is when I have entered the last data in a row and pressed <Enter> I move automatically to the A-column in the next row down.

Is this possible?

Regards and a Merry Christmas to all

Wibs


Hi everyone,

I'm going nuts trying to figure out how to autofill text from one cell
to another. For example, everytime I type text into cell A20, I want
the exact same thing to cell BL20. The same for B20, BL20, etc.

How do I go about that? I already know how to copy formulas from one
cell to another by dragging the skinny black line of the cell. I guess
I just need the formula for a simple IDENTICAL copying of text.

Thanks in advance,

Mike




Below is the code I am using. I am trying to change the subject to show the value of a cell.

Code:

 
    With OutMail
        .To = "name@name.com"
        .CC = ""
        .BCC = ""
        .Subject = "Attrition for" & Range("c5")
        .Body = ""
        .Attachments.Add wb2.FullName


When it sends it does not show the name in c5.
It just reads "Attrition for"

Should there be a different code?