Close Window   
Free Ebook
Get Your Free Excel
ebook!
Our Top 15 Excel Tutorials
Instant Access!
E-mail:
Excel Forum

Formula To Limit Maximum Value

Forum Register
Search Excel Forum Posts, Tutorials, Macros, Tips, and More

hi guys,

i have a simple spreadsheet where i'm totalling a few values thru a formula. it's similar to this:

=D13*F13

i'm trying to create a funcion that says if d13 * f13 >= 300, i want the value to stay at 300 max and at the same time, if d13 * f13 < 300, i want the total to remain whatever it is.

i have been able to create both of these formulas successfully by themselves but i can't combine them. is this possible?

any help would be greatly appreciated!!

View Answers     

Similar Excel Tutorials

Limit the Total Amount a User Can Enter into a Range of Cells in Excel
How to limit the amount that a user can enter into a range of cells in Excel.  This works great for budgeting works ...
Excel Data Validation - Limit What a User Can Enter into a Cell
Data Validation is a tool in Excel that you can use to limit what a user can enter into a cell.  It is a great too ...
Dynamic Named Range in Excel
How to create a named range that expands automatically when a new value is added to the range. This is a great lit ...
How to Use the IF Function in Excel
The IF statement is a simple yet powerful tool. Today we will go through how the IF function works and some useful ...
Change Axis Units on Charts in Excel
You can change the size of the units on a chart axis, their interval, where they start, where they finish, and mor ...
Thermometer Chart in Excel
How to create a thermometer chart in Excel. This is what we want: Steps to Create a Thermometer Chart in Excel Mak ...

Helpful Excel Macros

Hide Formulas in a Worksheet and Prevent Deletion
- This macro will hide all formulas within a workbook and not allow them to be deleted. The page will not be protected li
Determine if a Cell Contains a Function in Excel - Great for Conditional Formatting and Validation - UDF
- Determine if a cell in Excel contains a formula or function with this UDF (user defined function). This function return
Replace Formulas with Values (For The Entire Workbook)
- This macro will convert every formula in an entire workbook into its respective value. This is basically a quick way to
Change Formulas to Absolute or Relative References
- This macro will change the formulas in cells to absolute or relative. It allows you to change the rows or the columns o
Create a Line Chart with a Macro in Excel
- Create a line chart in Excel with this macro. This allows you to quickly and easily create line charts and graphs from

Similar Topics







Hello from sunny Madrid

I have created a complex formula to help me calculating Golf handicaps for players.


The formula is in the first cell and I want to drag the formula across to the right to cover the 18 holes.

But ALL the values change and I want some to change and some to stay constant.



How do I tell excel to drag the formula across but keep certain parts of the formula the same..ie ....=D11.... in the formula when dragged across doesn't go D12,D13;D14 in each cells formula and should stay as D11 for all.

Many thanks for your help

Ole


Sorry for the question. Normally I find answers to my excel questions by going through the help tab or by searching on Google. However, I don't even know what question to ask on this one!?!

Basically I have created a spreadsheet with several columns, but I have one column that lists the shirt size (YS, YM, YL, AS, AM, AL, XL, 2X, 3X) of each person. Is there a formula that I can create that will tabulate the number of sizes (i.e. AS=2, AM=7, etc.)?

In previous years I made a column for each size, and simply placed a "1" in the correct column, and had excel just add the 1's from each column. However, that takes more time and space. I was hoping to streamline it this time around.

Thanks for taking the time to read this post. Any help would be appreciated! Thanks, doug


Good afternoon!

I'm working with Excel 2003 sp 3 on Windows xp.

I have been banging my head trying to jar loose the formula to calculate man days where 1 equals 8 hours. I have one that was given to me by a coworker:

=INT(Q3/8)+(((Q3/8)-(INT(Q3/8)))*0.8)

That calculates man days from total hours. I need a formula that will total man days and return the man day answer. Example:

weekending 12/25 = 16.2 which is 16 man days and 2 hours
weekending 1/1 = 24.7 which is 24 man days and 7 hours

Total = 41 man days and 1 hour

I have also been asked if there was a way for a number to be entered into a spreadsheet and automatically put in order without a macro or "pushing a button".

Any advice is greatly appreciated!

Happy New Year!

~ Brenda ~


I have a spreadsheet with simple (addition/subtraction) formulas. The file is quite large and the formulas are too. All of a sudden, the formulas stopped working except when I double click in the cell containing the actual formula. For example, if I enter "2" in each cell, A2 and B2, cell B3 should reflect "4" because there is a formula in cell B3 which totals cells A2 and B2. Only by double clicking on cell B3 will the program actually calculate. I'm totally perplexed and so is my IT contact. Anyone?


I am trying to do a very simple copy and paste of a simple formula in Excel 2007 and nothing seems to be working. Excel will not let me copy and paste a formula and will only paste the value into to workbook. For instance, if I make a very simple spreadsheet such as:
A1 type in 10, A2 type in =A1 (calculated A2 to be 10)
B1 type in 5

And then click the copy on B1, and then click paste special on cell B2, the only options it gives me are text and unicode text and so no matter how I paste, cell b2 will always be populated with a value of 5. I cannot imagine a simpler copy and paste and no matter what I do I can't make this work.
All cells are formatted as general. It seems that all copy and pasting of formulas in my excel has been disabled. If I open any spreadsheet on my computer, I can't copy and paste formulas, but do the exact same thing on the exact same spreadsheet on any other computer and it works no problem.

Any help?


Hi all,

I have a dillemma here,

I have to create a schedule which incorporates lunches automatically (either half hour or 1-hour lunches, depending on the circumstances).

The schedule only has time in and time out, but I need excel to automatically deduct the lunch break depending on the circumstance:

If you worked less than 6 hours = no lunch
If you worked more than 6 hours, but less than or equal to 8 hours = 0.5 hour lunch
If you worked more than 8 hours = 1 hour lunch

I am assuming the formula for this will be really long, but I have looked online everywhere and have not found ONE formula for it. I can't put lunch breaks seperately, so all I have to work with is Time in/out.

Also, I wouldn't be able to use military time, so I don't know how excel can assume that time in is in the morning, and time out is in teh evening and/or half-day.

If someone can help it would be greatlyyyy appreciated


I need to create a bar chart for the year. I've already have 3 bars for each of the months, a plan, an actual, and a last year. I need to be able to split out just the actual bar, so that it is a stacked bar. The other two bars need to stay and remain unstacked. Is this possible?


i have a cell i have to check if it contains six characters. I have a list of data that i need to narrow down to six characters. I have successfully done that, but some of the cell has 5, 6, or 7 characters. The list contains about 600 cells, but i don't have time to format them individually. I want to create a formula that returns true or false if the cell contains 6 characters and false if it is above or below 6.

Can somebody help me, i'm new to excel!


I am looking for assistance in having one cell in a text format equals another cell that contains a time value in hh:mm format.

For example: Cell A1 has a time format (hh:mm) value of 04:00; which is the Start Time. I would like cell D1 to have a text format value of "04:00" (result is dependant upon what is entered in A1). I would duplicate the same formulas to reflect Stop Times in other cells.

My final result is to have another cell (F1) use the Concatenate formula to have the Start and Stop time shown in one cell as "04:00 - 12:30". The times would change based on the Time formated values entered into the Start and Stop time cells.

I have researched this in the board and found many excellent ways to do the opposite, but not convert Time format to Text format. Any assistance is greatly appreciated.

-Shane


I want to create 6 numbers from 11 numbers..
lets suppose my numbers a 1,2,3,4,5,6,7,8,9,10,11
I want to generate all possibilities of the 6 numbers. But i dont want duplicate series.. I mean 1,2,3,4,5,6 and 6,5,4,3,2,1 are duplicates.

ANY HELPS ARE GREATLY APPRECIATED


How do I calculate the number of batches per hour? Here's what I have so far:

Cell B5: start time: 4:15 formatted as 4:15:00 am
Cell B6: finish time: 6:15 formatted as 6:15:00 am
Cell B7: total time: 2:00 formula in cell: =TEXT(B6-B5,"h:mm")
Cell B8: total batches processed: 22 (this is entered manually)
Cell B9: batches per hour: formula in cell: =B8/TEXT(B7,"h")

as long as I have this formula in cell B9 the answer comes out correct which should be 11 per hour.
If the formula in B9 is B8/B7, the answer is 264.0, Is this because of the way excel is reading the total time or the total time is formatted as a time, not an actual number? Is this the correct way to solve the problem?
answer should be 11 per hour.


I am trying to calculate the average Talk Time into Minutes and Seconds. Every time I have tried, I get the wrong average.

For example, if I have a total of 53 calls and the total talk time is 4:19:05, what would the average talk per call be? I tried doing everything in seconds (this would give me a total of 15545 seconds) but the total I was getting is 4:89.

What would the formula be to get the correct average time?


Hi,

Im working with a large data spreadsheet that has Yes and No answers in different columns. There are blanks within the selection too.
I need to calculate only the Yes.
I have tried using the filters in the Pivot Table field list and they are not working.
So now i'm trying to add a COUNTIF formula in the Calculated Fields section.
The formula I'm using is =Countif('Time limit extension'="yes") and i get the answer "too few."
What should I be using in the formula to get the calculated field to work? I have search the whole forum and I haven't found an answer that can help me.

Please HELP!!!


Great tip! But one thing: On my machine (Excel 2008 Mac), the values in the formula cell are not correctly calculated simply by dragging. Instead, the values are equal to the cell above (the first entry formula value). To get the correct value, I need to click in the formula bar and then hit enter. (I only discovered this after an hour of tinkering, figuring I had botched the formula!)

Are there any ways around this so that it updates upon dragging the formula?


Hi Everyone,
I have searched online and in help but can't seem to find the best solution...

I have values like 00904BB303D6 that need to become: 00:90:4B:B3:03:D6 (the value is always 12 digits, and the : needs to appear every two digits.) Is there a formula that can easily do this for me? Your suggestions are greatly appreciated!

Thanks in advance!!!!


I'm trying to figure out what the formula is to multiply the total hours worked per week by their hourly pay for each individual. kind of like the
=Sum(I25:I32) Formula but I want to multiply the outcome of that formula by the hourly rate of 11.00, 15.00 and 16.00. Does anybody know how this can be done? If so I would greatly appreciate it.
Thanks!
charitydc


How do I restrict what I see on my screen (and specifically, limit the scroll
feature) to the rows and columns I'm actually using in an Excel 2003 Pro
spreadsheet?




Hi,
I made a simple worksheet that we have been manually entering the time for employees, but there are too many errors (even with simple math). Can someone help me convert the time of ex: written 8-4:30 or 10-3 (meaning 8:00am to 4:30pm) where you have the total weekly hours? Right now I have a column for overtime. Is there a way to automatically calculate the over time also? The work day is 8-4:30 with a half hour lunch (lunch is not calculated into the hours, so you minus a half hour). 8-4:30 equals 8 hours. So, if a person works 8am to 6:30pm, how can I set it up where in the first row of time, I will type in 8-6:30pm. In the totals column to the far right, it will display 8 hours. In the (O.T.) column, it will display 2 hours.

This way, when I call in my payroll, I will have the total "regular" hours in one row and underneath, I will have the total overtime hours.

Or... does anyone have a better solution to keeping track of their hours?

Thanks!
Marty


Ok, guys, new to this forum and I need some help with a business invoice. I know how to create a drop down list. But what I want to do is create a Drop-Down list with customers names, say cell A11. After selecting a customer name from the list, It would be able to populate the address in cells A12 and A13. Is this possible?


Hi,

Try this...

There are some valid datas in the cells A2 (Eg. 100), B2(Eg. 200), C2 and D2.
Data validation is used in cell K2 to limit it to a set of values.

Can we implement this formula?

IF(K2="Approved")
{
A2=A3; B2=B3; C2=C3; D2=D3; K2=K3;
}
ELSE
{
no change to any values.
}

Thanks in advance...


Hi guys,
I need to create a method of going down column b, and looking at the value in column A, and seeing if it exists in a table I have on another sheet. If Value A exists, then I want ColB to say yes or no.

It seems like it should be so simple, but its killing me!




Entering time values in custom format [h]:mm:ss
Cells accept hours over 23,
Adding cells in column returns correct total time.
Have not found a way to multiply these cells by a $ hourly rate.
So use HOUR(cell ref) and MINUTE(cell ref) to capture values in referenced
cell - then use these values to calculate total payment for $rate per hour.
However, the HOUR(cell ref) formula returns the hours in excess of 24 when
the cell contains an hour value in excess of 23 (ie 27 hours returns 3).




I am trying to figure out how to write a formula to figure out production cycle time.
We will be building 8 "widgets" a day.
We will work 10 hours a day.
There is a 20 minute break at 9:20 am.
Production shuts down for lunch 30 minutes for lunch at 12:30.
Production starts at 6:00 am.
Here is what I can do.
Production cycle time = (10*60)-30/8 or 71.25 minutes
If we start at 6:00 am, the first scheduled cycle completion time = TIME(6,0,0+71.25/1440)

My problem is when I am trying to use a logical "IF' statement to account for the 20 minute break or lunch and still calculate the end of each cycle time through the day I receive a number of error messages.
This is the formula I am trying to make work. I have the cell the formula is in, formatted with a "mm,ss" format.
=(IF(D4+G1/1440>9:20,(D4+G1)/24,(D4+G1+15)/1440))
I have included an attachment to help (a picture is worth a thousand words).

Any help will be greatly appreciated.
I have bought a number of books in an attempt to figure this out, and I am still stumped


I have an excel worksheet that adds two other worksheets in a data
triangle. I copied it to create a new data set and used find &
replace to change the worksheet references to the new ones.

The cells still contain the result of the old formula referring to the
previous worksheets. The only way I can get the formula to return the
correct result is to edit (F2) each cell and press enter. Calc now
(F9) does nothing.

I've seen this before, but this time, I need to calculate many
thousands of cells and don't have time for this workaround.

Any ideas?

Thanks.

Don S



Hi there

I am trying to calculate our On Time Delivery. I want this as a simple percentage of jobs. I have got this running in the following way:

Column M - Estimated Delivery dates
Column N - Actual Delivery dates
Column O - =IF(SUM(M2-N2)>0,1,0)

Then I have calculated On Time Delivery as: =SUM((SUM(O2:O252))/(COUNTA(N2:N252)))

This seems to work fine. My problem is, if we enter a date in Estimated without a corresponding Actual date, the formula for Column O fills out anyway and improves our On Time Delivery Percentage. How can I set this up so that the formula doesn't calculate if there is no data in Column N?

Any help much appreciated

Thanks,

James