Comparing 3 Values From 3 Different Cells To See If They All Match 


Comparing 3 Values From 3 Different Cells To See If They All Match  Excel 
View Answers 
Hey
I have three columns containing last name values from 3 different sources that I've brought into one sheet. I am trying to find a way to compare all three values to establish if they are the same.
Of the three values there is no master, Each value may be different. So essentially it would be like doing =IF(a1=a2=a3,"match", "nomatch")
But of course this isn't possible.
I don't care about obtaining detail about which value matches which. I just need true or false response as to whether all three values are the same or not.
Thanks for any help anyone can provide.
Aaz
I have three columns containing last name values from 3 different sources that I've brought into one sheet. I am trying to find a way to compare all three values to establish if they are the same.
Of the three values there is no master, Each value may be different. So essentially it would be like doing =IF(a1=a2=a3,"match", "nomatch")
But of course this isn't possible.
I don't care about obtaining detail about which value matches which. I just need true or false response as to whether all three values are the same or not.
Thanks for any help anyone can provide.
Aaz
Similar Excel Tutorials
Wildcards in Excel
Wildcards are characters that allow you to make more robust functions, searches, and filters in Excel. You put wil ...
Wildcards are characters that allow you to make more robust functions, searches, and filters in Excel. You put wil ...
Best Lookup Formula in Excel  Index and Match
A lookup using INDEX and MATCH is like a VLOOKUP without the restrictions. Index and Match lookups offer you free ...
A lookup using INDEX and MATCH is like a VLOOKUP without the restrictions. Index and Match lookups offer you free ...
Return the Min or Max Value Using a Lookup in Excel  INDEX MATCH
Find the Min or Max value in a range and, based on that, return a value from another range. This is an advanced lo ...
Find the Min or Max value in a range and, based on that, return a value from another range. This is an advanced lo ...
SUMIFS  Sum Values Based on Multiple Criteria in Excel
The SUMIFS function allows you to sum values that meet multiple criteria across multiple columns. Each value that ...
The SUMIFS function allows you to sum values that meet multiple criteria across multiple columns. Each value that ...
Quickly Replace A Lot of Data in Excel
The Find & Replace works much the same way as Find and is located in the same place. (Find & Select drop do ...
The Find & Replace works much the same way as Find and is located in the same place. (Find & Select drop do ...
Count the Number of Cells that Start or End with Specific Text in Excel
How to count cells that match text at the start or the end of a string in Excel. If you want a fuller explanation o ...
How to count cells that match text at the start or the end of a string in Excel. If you want a fuller explanation o ...
Subscribe for Weekly Tutorials
BONUS: subscribe now to download our Top Tutorials Ebook!
Helpful Excel Macros
Excel Macro that Searches Entire Workbook and Returns All Matches
 This is the ultimate Lookup Macro for Excel. It will search every worksheet in the workbook and return all of the mat
 This is the ultimate Lookup Macro for Excel. It will search every worksheet in the workbook and return all of the mat
Excel Macro to Save a Specific Worksheet as a New File
 This Excel Macro allows you to save a specific worksheet within the Excel Workbook to its own new file. You will be a
 This Excel Macro allows you to save a specific worksheet within the Excel Workbook to its own new file. You will be a
Complete Guide to Printing in Excel Macros  PrintOut Method in Excel
 This free Excel macro illustrates all of the possible parameters and arguments that you can include in the PrintOut Meth
 This free Excel macro illustrates all of the possible parameters and arguments that you can include in the PrintOut Meth
Replace Formulas with Values (For The Entire Workbook)
 This macro will convert every formula in an entire workbook into its respective value. This is basically a quick way to
 This macro will convert every formula in an entire workbook into its respective value. This is basically a quick way to
Filter Data in Excel to Display Results that Contain 1 of 2 Possible Values  AutoFilter
 This Excel macro filters data in Excel to display results that contain 1 of 2 possible values. This macro uses the xlor
 This Excel macro filters data in Excel to display results that contain 1 of 2 possible values. This macro uses the xlor
Similar Topics
Hello,
I am new to using Excel and I am not very computer literate. I am looking for some help with a spreadsheet I am making. Here is the problem:
I have a column of 14 numbers in cells A1 to A14. If all of these values are less than 2%, I would like a "Pass" to display in cell B1. If any of these values are greater than 2% I would like a "Fail" to display in cell B1.
I have got a formula that works for a single cell but I can't figure out how to get it to apply to more than one cell. For example, I have entered =IF(A1<2,"Pass","Fail") in cell B1. Now if the value I enter in A1 is less than 2, it shows a "Pass", and if the value in A1 is greater than 2 it shows a "Fail" in cell B1. How can I get this to apply to all of the cells from A1 to A14?
If somebody could help me out that would be great.
Thanks,
Randy
I am new to using Excel and I am not very computer literate. I am looking for some help with a spreadsheet I am making. Here is the problem:
I have a column of 14 numbers in cells A1 to A14. If all of these values are less than 2%, I would like a "Pass" to display in cell B1. If any of these values are greater than 2% I would like a "Fail" to display in cell B1.
I have got a formula that works for a single cell but I can't figure out how to get it to apply to more than one cell. For example, I have entered =IF(A1<2,"Pass","Fail") in cell B1. Now if the value I enter in A1 is less than 2, it shows a "Pass", and if the value in A1 is greater than 2 it shows a "Fail" in cell B1. How can I get this to apply to all of the cells from A1 to A14?
If somebody could help me out that would be great.
Thanks,
Randy
Hi,
Try this...
There are some valid datas in the cells A2 (Eg. 100), B2(Eg. 200), C2 and D2.
Data validation is used in cell K2 to limit it to a set of values.
Can we implement this formula?
IF(K2="Approved")
{
A2=A3; B2=B3; C2=C3; D2=D3; K2=K3;
}
ELSE
{
no change to any values.
}
Thanks in advance...
Try this...
There are some valid datas in the cells A2 (Eg. 100), B2(Eg. 200), C2 and D2.
Data validation is used in cell K2 to limit it to a set of values.
Can we implement this formula?
IF(K2="Approved")
{
A2=A3; B2=B3; C2=C3; D2=D3; K2=K3;
}
ELSE
{
no change to any values.
}
Thanks in advance...
Hi
I am brand new to Mr. Excel and would love some advice.
I searched the boards pretty extensively but could not find what I am looking for...I apologize if this is a duplicate.
I am using Excel 2007
How do you automatically add rows and update values for cells to a linked worksheet in which rows have been added? For example: Sheet 1, columns A & B are linked to Sheet 2, columns A & B. Sheet 2 has values in A1:A5 & B1:B5 and Sheet 1, since it is linked, has the same info. I want to add a row in between 3 & 4 on Sheet 2 and want Sheet 1 to automatically add the same row and update the value of the cell in column A & B.
Any help is greatly appreciated!
John
I am brand new to Mr. Excel and would love some advice.
I searched the boards pretty extensively but could not find what I am looking for...I apologize if this is a duplicate.
I am using Excel 2007
How do you automatically add rows and update values for cells to a linked worksheet in which rows have been added? For example: Sheet 1, columns A & B are linked to Sheet 2, columns A & B. Sheet 2 has values in A1:A5 & B1:B5 and Sheet 1, since it is linked, has the same info. I want to add a row in between 3 & 4 on Sheet 2 and want Sheet 1 to automatically add the same row and update the value of the cell in column A & B.
Any help is greatly appreciated!
John
Hello, what I would like to do is take a portion of a sheet..... So the cells I want to mirror are in the proposal sheet cells B32 x F51. And then mirror the exact duplicate copy to another sheet. The other sheet should have those same values at A20 X G39. What I am trying to do is have a sheet that has skus, prices, and so forth and then when I add,delete, merge, color, or do anything to the cell on the "proposal creation" sheet I want it to mirror only a specific cells to another sheet that is "salesman copy" that we will print to clients. So this way ont he proposal copy a salesman can insert rows or even change the color of the cells and then have it mirror exactly the same on the "salesman copy" which is what we will print for clients. Thank you.
I'm comparing 12 cells on different sheets (in the same workbook) and need to determine if they are all an exact match to one another. Basically, I want something like exact(), but I need to compare more than two strings. Any ideas?
Thanks!
Thanks!
Right now I have a sports league with 8 teams, I'd like to create a random 7game schedule where each team plays the other team only once. Essentially this will be a 7game round robin. However, I'd like to be able to use this for any number of teams and games.
I'd like to do this in Excel, but I can't figure out how to have a randomly generating nonrepeating macro with text values in cells.
So right now I have a column of 8 values and need matrix of 7 columns by 8 rows next to it.
I've found this thread that has one for numbers, but I can't figure out how to do it for text values...
http://www.excelforum.com/excelprog...mnumbers.html
Thanks all!
I'd like to do this in Excel, but I can't figure out how to have a randomly generating nonrepeating macro with text values in cells.
So right now I have a column of 8 values and need matrix of 7 columns by 8 rows next to it.
I've found this thread that has one for numbers, but I can't figure out how to do it for text values...
http://www.excelforum.com/excelprog...mnumbers.html
Thanks all!
So I've got some data, which has the approximate form of a sine function. I want to find all the xaxis intercepts. I tried using the intercept function and swapping around the y values for the x values, but it only returns 1 value (so I'd guess it uses a linear regression to estimate a single line through the axis).
I was thinking of trying a nested if/and statement but I haven't quite figured out how to do it. Basically I want to identify the two values where it switches from positive to negative and also indentify the values where it goes negative to positive, I can then fit a straight line between them to find a better approximation of the intercept (though it might not be necessary). Preferably I'd like it all one function as I'm not doing it in VBA (I might do later though, we'll see).
Can anyone suggest how I'd find these value or the xintercept. Any help would be greatly appreciated.
I was thinking of trying a nested if/and statement but I haven't quite figured out how to do it. Basically I want to identify the two values where it switches from positive to negative and also indentify the values where it goes negative to positive, I can then fit a straight line between them to find a better approximation of the intercept (though it might not be necessary). Preferably I'd like it all one function as I'm not doing it in VBA (I might do later though, we'll see).
Can anyone suggest how I'd find these value or the xintercept. Any help would be greatly appreciated.
Column 1 has roughly 20 rows of information. Cell C1 has the formula =A1.
Is there a formula so that when I drag C1 horizontally into D1, E1, F1, ..., the values placed in each cell will be =A2, =A3, =A4, ...
I do not want to transpose the values from column 1 into C1, D1,.... I want these cells to have a formula that links them up to column 1's values
Thanks
Is there a formula so that when I drag C1 horizontally into D1, E1, F1, ..., the values placed in each cell will be =A2, =A3, =A4, ...
I do not want to transpose the values from column 1 into C1, D1,.... I want these cells to have a formula that links them up to column 1's values
Thanks
I have cells in a column, some colored yellow, some not. I am trying to use
the SUMIF function to sum only the cells in the range that are colored. Can
this be done? Can I enter something in the "criteria" part of the formula
that can do this?
=SUMIF(D3:D13,"criteria",D3:D13)
I also tried to use the CELL function's color feature, but I couldn't get it
to work right. I don't know how to get Excel to recognize if a cell is
colored in a formula.
=CELL("color",cell)
It might just be that I don't know what this means in Help:
"color" > 1 if the cell is formatted in color for negative values;
otherwise returns 0 (zero).
Can anyone help?
the SUMIF function to sum only the cells in the range that are colored. Can
this be done? Can I enter something in the "criteria" part of the formula
that can do this?
=SUMIF(D3:D13,"criteria",D3:D13)
I also tried to use the CELL function's color feature, but I couldn't get it
to work right. I don't know how to get Excel to recognize if a cell is
colored in a formula.
=CELL("color",cell)
It might just be that I don't know what this means in Help:
"color" > 1 if the cell is formatted in color for negative values;
otherwise returns 0 (zero).
Can anyone help?
Hi Everyone,
I have searched online and in help but can't seem to find the best solution...
I have values like 00904BB303D6 that need to become: 00:90:4B:B3:03:D6 (the value is always 12 digits, and the : needs to appear every two digits.) Is there a formula that can easily do this for me? Your suggestions are greatly appreciated!
Thanks in advance!!!!
I have searched online and in help but can't seem to find the best solution...
I have values like 00904BB303D6 that need to become: 00:90:4B:B3:03:D6 (the value is always 12 digits, and the : needs to appear every two digits.) Is there a formula that can easily do this for me? Your suggestions are greatly appreciated!
Thanks in advance!!!!
Regarding Charts in Excel:
Is there a way to have the Min and Max values adjusted dynamically for the Scale of the values being displayed ??
I know that I can use named ranges to display various sections of data  month by month, or quarter by quarter, for example.
But when the value of these ranges vary greatly from section to section I end of having to manually go and adjust the Min and Max values of the chart scale.
For example, if I was looking at a graph of the S&P 500's prices last November, a Min and Max range of 750 to 1200 would be fine. But if I had a dynamic range established and scrolled over to view the S&P 500's prices for this past February, I would need a Min and Max range of around 650 to 850.
Is there a way to have these Min & Max values adjust automatically depending on the values being displayed ??
Thanks
StanSz
Is there a way to have the Min and Max values adjusted dynamically for the Scale of the values being displayed ??
I know that I can use named ranges to display various sections of data  month by month, or quarter by quarter, for example.
But when the value of these ranges vary greatly from section to section I end of having to manually go and adjust the Min and Max values of the chart scale.
For example, if I was looking at a graph of the S&P 500's prices last November, a Min and Max range of 750 to 1200 would be fine. But if I had a dynamic range established and scrolled over to view the S&P 500's prices for this past February, I would need a Min and Max range of around 650 to 850.
Is there a way to have these Min & Max values adjust automatically depending on the values being displayed ??
Thanks
StanSz
I know that you can do PASTE > VALUES in order to keep your conditional formatting on an existing sheet, but sadly the people in my office are prone to not understanding this ("It's a bit technical") and so they just pasting blocks of text from elsewhere and lose it all.....
Does anyone have any suggestions about how to maintain the formatting when people just do a traditional C&P ?
Thanks
Does anyone have any suggestions about how to maintain the formatting when people just do a traditional C&P ?
Thanks
Hello.
I have two huge excel files, with many rows and columns, they "should" look the same.
But I need to find out if anything has been added or removed from the second one compared to the first one.
Which is the easiest way to accomplish this?
Searched this forum and Google but couldn't find what i was looking for.
Thanks in advance!
I have two huge excel files, with many rows and columns, they "should" look the same.
But I need to find out if anything has been added or removed from the second one compared to the first one.
Which is the easiest way to accomplish this?
Searched this forum and Google but couldn't find what i was looking for.
Thanks in advance!
Hi all,
I'm looking for help in building a formula which will sort numbers into different "buckets". My spreadsheet has a range of values in column B. These values can range anywhere from 100,000,000 to +10,000,000. I'd like to be able to sort them into the following buckets:
I'm looking for help in building a formula which will sort numbers into different "buckets". My spreadsheet has a range of values in column B. These values can range anywhere from 100,000,000 to +10,000,000. I'd like to be able to sort them into the following buckets:
Hi all,
I have several accumulated values from other spreadsheets on my spreadsheet and I'm combining and organizing them on mine. However, the cell alignment isn't working properly as you can see in the picture below.
Now, I can certainly retype these values and align them and they'll align all nice and neat; however, I have a huge Column and retyping that column would take an inordinate amount of time.
I searched earlier on cell alignment and couldn't find anything. Any help is appreciated.
Sincerely,
Bill
I have several accumulated values from other spreadsheets on my spreadsheet and I'm combining and organizing them on mine. However, the cell alignment isn't working properly as you can see in the picture below.
Now, I can certainly retype these values and align them and they'll align all nice and neat; however, I have a huge Column and retyping that column would take an inordinate amount of time.
I searched earlier on cell alignment and couldn't find anything. Any help is appreciated.
Sincerely,
Bill
Is it possible to assign values to names in a list, so that when you validate
it as a dropdown list, you can select a name from the dropdown and it's
corresponding value will be added to separate cell? Basically, I have survey
questions which have five possible responses: Excellent  Very Good  Good 
Fair  Poor. We want to assign a value to each, 5 for Excellent, 4 for Very
Good and so on, so that when a response is selected from a dropdown, it's
value appears in a separate cell (so that we can calculate a total and
average score from the selections).
Thanks
B
it as a dropdown list, you can select a name from the dropdown and it's
corresponding value will be added to separate cell? Basically, I have survey
questions which have five possible responses: Excellent  Very Good  Good 
Fair  Poor. We want to assign a value to each, 5 for Excellent, 4 for Very
Good and so on, so that when a response is selected from a dropdown, it's
value appears in a separate cell (so that we can calculate a total and
average score from the selections).
Thanks
B
Entering time values in custom format [h]:mm:ss
Cells accept hours over 23,
Adding cells in column returns correct total time.
Have not found a way to multiply these cells by a $ hourly rate.
So use HOUR(cell ref) and MINUTE(cell ref) to capture values in referenced
cell  then use these values to calculate total payment for $rate per hour.
However, the HOUR(cell ref) formula returns the hours in excess of 24 when
the cell contains an hour value in excess of 23 (ie 27 hours returns 3).
Cells accept hours over 23,
Adding cells in column returns correct total time.
Have not found a way to multiply these cells by a $ hourly rate.
So use HOUR(cell ref) and MINUTE(cell ref) to capture values in referenced
cell  then use these values to calculate total payment for $rate per hour.
However, the HOUR(cell ref) formula returns the hours in excess of 24 when
the cell contains an hour value in excess of 23 (ie 27 hours returns 3).
Hi there. I'm using Excel 2007 and often use filters to find inconsistent data (misspellings, etc.) and then clean up the data using the fill handle to fill in correctly formatted values. I'm finding that, with a simple filter on, dragging over cells hidden by the filter changes the values in the hidden cells too. This is something I don't remember from my last version of Excel. I'm wondering if I've misremembered how this control works, or if there is a setting I can't find.
My goal is to drag and fill (or paste) in a colum with a range of rows wiht some hidden (filtered out) rows, and have the filtered out data be unaffected, if that makes sense.
Thanks!
T
My goal is to drag and fill (or paste) in a colum with a range of rows wiht some hidden (filtered out) rows, and have the filtered out data be unaffected, if that makes sense.
Thanks!
T
for example if you have values of
1 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 1
how to count number of occurances where value of 1 is 3 consecutive times? Obviously answer is 3 in this instance but is there an excel formula to count/sum this?
Thanks in advance
1 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 1
how to count number of occurances where value of 1 is 3 consecutive times? Obviously answer is 3 in this instance but is there an excel formula to count/sum this?
Thanks in advance
Is there an Excel guru that can help with this  its related to "drop down menus"
I have 2 colombs of data.
AT the bottom of the first, I have created a drop down menu using the "data validation" feature in excel.
At the bottom of the second colomb, I have used an "IF" function that returns a result, which depends on what value is chosen from the drop down menu in colomb 1
The problem I have is that I want the TRUE result from the IF function to be another drop down menu, being the data in colomb 2.
How do you write an IF function where the TRUE result is a drop down menu??
I tried to create a drop down menu of colomb2 elsewhere in the spread sheet, and used that cells location as the TRUE value, but this didn't work either...
ANy suggestions??
I have 2 colombs of data.
AT the bottom of the first, I have created a drop down menu using the "data validation" feature in excel.
At the bottom of the second colomb, I have used an "IF" function that returns a result, which depends on what value is chosen from the drop down menu in colomb 1
The problem I have is that I want the TRUE result from the IF function to be another drop down menu, being the data in colomb 2.
How do you write an IF function where the TRUE result is a drop down menu??
I tried to create a drop down menu of colomb2 elsewhere in the spread sheet, and used that cells location as the TRUE value, but this didn't work either...
ANy suggestions??
I have workbook in which I want to save a specific worksheet to a new file with only the values saved  all data in this worksheet are references to cells on another worksheet, which is using VLOOKUP to pull data from a database.
Found the following code and it gets me close, but it copies the cell references, not the values. It also allows me to specify the file name from a cell reference.
I want the new workbook file to simply be saved, not opened, and a message box to display stating where the file was saved (will always be in the same location on the LAN).
What modifications do I make to this to get this to work per above requirements?
Sub CopyMe()
Dim SaveMeAs As String
SaveMeAs = Sheets("Sheet1").Range("B2").Text
Sheets("Sheet3").Copy
ActiveWorkbook.SaveAs Filename:="C:\My Documents\" & SaveMeAs
End Sub
Found the following code and it gets me close, but it copies the cell references, not the values. It also allows me to specify the file name from a cell reference.
I want the new workbook file to simply be saved, not opened, and a message box to display stating where the file was saved (will always be in the same location on the LAN).
What modifications do I make to this to get this to work per above requirements?
Sub CopyMe()
Dim SaveMeAs As String
SaveMeAs = Sheets("Sheet1").Range("B2").Text
Sheets("Sheet3").Copy
ActiveWorkbook.SaveAs Filename:="C:\My Documents\" & SaveMeAs
End Sub
Hello from sunny Madrid
I have created a complex formula to help me calculating Golf handicaps for players.
The formula is in the first cell and I want to drag the formula across to the right to cover the 18 holes.
But ALL the values change and I want some to change and some to stay constant.
How do I tell excel to drag the formula across but keep certain parts of the formula the same..ie ....=D11.... in the formula when dragged across doesn't go D12,D13;D14 in each cells formula and should stay as D11 for all.
Many thanks for your help
Ole
I have created a complex formula to help me calculating Golf handicaps for players.
The formula is in the first cell and I want to drag the formula across to the right to cover the 18 holes.
But ALL the values change and I want some to change and some to stay constant.
How do I tell excel to drag the formula across but keep certain parts of the formula the same..ie ....=D11.... in the formula when dragged across doesn't go D12,D13;D14 in each cells formula and should stay as D11 for all.
Many thanks for your help
Ole
I'm trying to come up with a solution to calculate the man hours and days worked over multiple sheets.
I have a file that has 8 sheets. the first seven sheets are the days of the week and the 8th sheet is where I want to calculate the hours.
The days of the week consists of "Name" "Date" Hours"
The 8th sheet consists of "Name", "Days of the week in their own column (7 columns in total)", "Total Hours" and "Total Days Worked"
Now... each day is always a different group and what I'm hoping for is to create a formula that can grab each name with their hours and throw them into the 8th sheet. So when the end of the week is done I have all the Employees weekly hours and days worked all finished.
I hope this makes sense. This file is to track about 100 employees that are on a rotational work schedule.
I have attached a sample file.
Thanks in advance for your help.
I have a file that has 8 sheets. the first seven sheets are the days of the week and the 8th sheet is where I want to calculate the hours.
The days of the week consists of "Name" "Date" Hours"
The 8th sheet consists of "Name", "Days of the week in their own column (7 columns in total)", "Total Hours" and "Total Days Worked"
Now... each day is always a different group and what I'm hoping for is to create a formula that can grab each name with their hours and throw them into the 8th sheet. So when the end of the week is done I have all the Employees weekly hours and days worked all finished.
I hope this makes sense. This file is to track about 100 employees that are on a rotational work schedule.
I have attached a sample file.
Thanks in advance for your help.
I am trying to work out how to calculate the geometric mean of a series of values, some of which are negative, ie. investment returns over a series of years with some negatives.
The Geomean function doesn't work because it only uses positive numbers.
Any help would be greatly appreciated.
The Geomean function doesn't work because it only uses positive numbers.
Any help would be greatly appreciated.
I have a coworker's file that he is having trouble with. He is using Excel 2000 SP3. When copying a cell with a formula in it of "=D6+C6" and pasting it into the next cell down, it will display the same value in the cell as the calculated value from above, but has the correct formula displayed in the formula bar of "=D7+C7".
Example:
A1: 50
A2: 10
B1: 60
B2: 20
A3: Formula: =A1+A2 Displays: 60
Right click A3, Copy, right click B3, paste
A3 displays 60
When I click save, it will change the display value to 80.
I am trying this on his workstation and mine. Mine has Office 2010, so I think there might be an issue with the file itself.
Also, not just copy and paste. I can also just click the top cell after filling in the formula and then drag the bottom right of the cell downward and it will do the same of filling in the correct formula, but have the incorrect value.
I know that I could get him to just click save each time before really looking at the results, but that is just a band aid to the problem.
Any ideas how to fix this?
Example:
A1: 50
A2: 10
B1: 60
B2: 20
A3: Formula: =A1+A2 Displays: 60
Right click A3, Copy, right click B3, paste
A3 displays 60
When I click save, it will change the display value to 80.
I am trying this on his workstation and mine. Mine has Office 2010, so I think there might be an issue with the file itself.
Also, not just copy and paste. I can also just click the top cell after filling in the formula and then drag the bottom right of the cell downward and it will do the same of filling in the correct formula, but have the incorrect value.
I know that I could get him to just click save each time before really looking at the results, but that is just a band aid to the problem.
Any ideas how to fix this?